Currently VBUS is turned off while a usb device is detached, and turned
on again by the polling routine. This short period VBUS loss prevents
usb modem to switch mode.

VBUS should be constantly on for host-only mode, so this changes the
driver to not turn off VBUS for host-only mode.

Fixes: 2f3fd2c5bde1 ("usb: musb: Prepare dsps glue layer for PM runtime 
support")
Cc: sta...@vger.kernel.org #v4.11
Reported-by: Moreno Bartalucci <moreno.bartalu...@tecnorama.it>
Acked-by: Tony Lindgren <t...@atomide.com>
Signed-off-by: Bin Liu <b-...@ti.com>
---
 drivers/usb/musb/musb_dsps.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 9c7ee26ef388..bc6a9be2ccc5 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -245,6 +245,11 @@ static int dsps_check_status(struct musb *musb, void 
*unused)
                dsps_mod_timer_optional(glue);
                break;
        case OTG_STATE_A_WAIT_BCON:
+               /* keep VBUS on for host-only mode */
+               if (musb->port_mode == MUSB_PORT_MODE_HOST) {
+                       dsps_mod_timer_optional(glue);
+                       break;
+               }
                musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
                skip_session = 1;
                /* fall */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to