AVR32 is gone. Now it's time to clean up the driver by removing
leftovers that was used by AVR32 related code.
Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
drivers/usb/gadget/udc/Kconfig | 2 +-
drivers/usb/gadget/udc/atmel_usba_udc.h | 11 -----------
2 files changed, 1 insertion(+), 12 deletions(-)
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 1c14c283cc47..8f00251fd917 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -55,7 +55,7 @@ config USB_LPC32XX
config USB_ATMEL_USBA
tristate "Atmel USBA"
- depends on ((AVR32 && !OF) || ARCH_AT91)
+ depends on ARCH_AT91
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h
b/drivers/usb/gadget/udc/atmel_usba_udc.h
index 9551b704bfd3..433bed0c481e 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.h
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -43,13 +43,8 @@
#define USBA_REMOTE_WAKE_UP (1 << 10)
#define USBA_PULLD_DIS (1 << 11)
-#if defined(CONFIG_AVR32)
-#define USBA_ENABLE_MASK USBA_EN_USBA
-#define USBA_DISABLE_MASK 0
-#elif defined(CONFIG_ARCH_AT91)
#define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS)
#define USBA_DISABLE_MASK USBA_DETACH
-#endif /* CONFIG_ARCH_AT91 */
/* Bitfields in FNUM */
#define USBA_MICRO_FRAME_NUM_OFFSET 0
@@ -191,15 +186,9 @@
| USBA_BF(name, value))
/* Register access macros */
-#ifdef CONFIG_AVR32
-#define usba_io_readl __raw_readl
-#define usba_io_writel __raw_writel
-#define usba_io_writew __raw_writew
-#else
#define usba_io_readl readl_relaxed
#define usba_io_writel writel_relaxed
#define usba_io_writew writew_relaxed
-#endif
#define usba_readl(udc, reg) \
usba_io_readl((udc)->regs + USBA_##reg)
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
