Add support for hisi-inno-usb2 phy.

Signed-off-by: Jiancheng Xue <xuejianch...@hisilicon.com>
---
 .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt 
b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
new file mode 100644
index 0000000..21f8208
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
@@ -0,0 +1,36 @@
+HiSilicon INNO USB2 PHY
+-----------------------
+Required properties:
+- compatible: Should be one of the following strings:
+               "hisilicon,inno-usb2-phy",
+               "hisilicon,hi3798cv200-usb2-phy",
+- #phy-cells: Must be 0
+- hisilicon,peripheral-syscon: Phandle of syscon used to control phy.
+- clocks: Phandle and clock specifier pair for reference clock utmi_refclk.
+- resets: List of phandle and reset specifier pairs for each reset signal in
+reset-names.
+- reset-names: Should be "por_rst" and "test_rst". The test_rst only
+exists in some of SOCs, so it is optional.
+
+Phy node can include up to four subnodes. Each subnode represents one port.
+The required properties of port node are as follows:
+- clocks: Phandle and clock specifier pair for utmi_clock.
+- resets: List of phandle and reset specifier pairs for port reset and utmi 
reset.
+- reset-names: List of reset signal names. Should be "port_rst" and "utmi_rst"
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+usb_phy: phy {
+                compatible = "hisilicon,inno_usb2_phy";
+                #phy-cells = <0>;
+                hisilicon,peripheral-syscon = <&peri_ctrl>;
+                clocks = <&crg USB2_REF_CLK>;
+                resets = <&crg 0xb4 2>;
+                reset-names = "por_rst";
+                port0 {
+                        clocks = <&crg USB2_UTMI0_CLK>;
+                        resets = <&crg 0xb4 5>, <&crg 0xb4 1>;
+                        reset-names = "port_rst", "utmi_rst";
+                };
+        };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to