Xhci driver handles USB transaction errors on transfer events, but transaction errors are possible on address device command completion events as well.
The xHCI specification (section 4.6.5) says: A USB Transaction Error Completion Code for an Address Device Command may be due to a Stall response from a device. Software should issue a Disable Slot Command for the Device Slot then an Enable Slot Command to recover from this error. This patch handles USB transaction errors on address command completion events. The related discussion threads can be found through below links. http://marc.info/?l=linux-usb&m=149362010728921&w=2 http://marc.info/?l=linux-usb&m=149252752825755&w=2 Suggested-by: Mathias Nyman <mathias.ny...@linux.intel.com> Signed-off-by: Lu Baolu <baolu...@linux.intel.com> --- drivers/usb/host/xhci.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b2ff1ff..9cc56cd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3836,6 +3836,12 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, ret = -EINVAL; break; case COMP_USB_TRANSACTION_ERROR: + xhci_free_virt_device(xhci, udev->slot_id); + ret = xhci_disable_slot(xhci, command, udev->slot_id); + udev->slot_id = 0; + if (!ret) + xhci_alloc_dev(hcd, udev); + dev_warn(&udev->dev, "Device not responding to setup %s.\n", act); ret = -EPROTO; break; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html