On 10/17/2017 1:34 AM, John Stultz wrote: > On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan > <minas.harutyun...@synopsys.com> wrote: >> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt. >> According previously sent by you register dump (GHWCFG2 = 0x23affc70) >> your core OTG_MODE=0. >> Bellow fragment from programming guide on Device disconnect: >> >> "7.3Device Disconnection >> The device session ends when the USB cable is disconnected or if the >> VBUS is switched off by the Host. The >> device disconnect flow varies depending on the value of the OTG_MODE >> configuration parameter. >> >> When OTG_MODE = 0,1, or 3 >> When OTG_MODE is set to 0,1, or 3, the device disconnect flow is as follows: >> 1. When the USB cable is unplugged or when the VBUS is switched off by >> the Host, the Device core >> trigger GINTSTS.OTGInt [bit 2] interrupt bit. >> 2. When the device application detects GINTSTS.OTGInt interrupt, it >> checks that the >> GOTGINT.SesEndDet (Session End Detected) bit is set to 1’b1." >> >> So, you should receive and handle "Session End Detected". In function >> dwc2_handle_otg_intr() on this interrupt (in device mode) calling >> dwc2_hsotg_disconnect() function. By adding your patch "[PATCH 3/3] usb: >> dwc2: Fix UDC state tracking" state changed to not attached as required. > > > So, on the HiKey board (using 4.14-rc5 + Vardan's patch), I'm not > seeing the GOTGINT_SES_END_DET in dwc2_handle_otg_intr() when I remove > the USB OTG cable. > > In fact, I'm not seeing any calls to dwc2_handle_otg_intr()... which > seems... odd maybe? Any clues as to what might be going wrong then? > > thanks > -john > Hi John Stultz, So, on Hikey board on unplug B connector GOTGINT.SesEndDet interrupt not asserted, instead asserted GINTSTS_CONIDSTSCHNG. Please, confirm.
In this case without your patch "[PATCH 1/3] usb: dwc2: Improve gadget state disconnection handling" but by applying your patch "[PATCH 3/3] usb: dwc2: Fix UDC state tracking": 1. On B plug connect UDC state will be set to "configured" 2. On B plug disconnect - "not attached". Is it Ok for you? Meantime, I'll check with HW team why GOTGINT.SesEndDet interrupt not asserted on unplug B connector. Thanks, Minas -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html