Hi,

On 10/24/2017 3:27 AM, Martin Blumenstingl wrote:
> This integrates the PHY roothub wrapper into the core hcd
> infrastructure. Multiple PHYs which are part of the roothub devicetree
> node (which is a sub-node of the sysdev's node) are now managed
> (= powered on/off when needed), by the new usb_phy_roothub code.
>
> One example where this is required is the Amlogic GXL and GXM SoCs:
> They are using a dwc3 USB controller with up to three ports enabled on
> the internal roothub. Using only the top-level "phy" properties does not
> work here since one can only specify one "usb2-phy" and one "usb3-phy",
> while actually at least two "usb2-phy" have to be specified.
>
> Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
> Tested-by: Neil Armstrong <narmstr...@baylibre.com>
> Acked-by: Alan Stern <st...@rowland.harvard.edu>
> ---
>  drivers/usb/core/hcd.c  | 26 ++++++++++++++++++++++++++
>  include/linux/usb/hcd.h |  1 +
>  2 files changed, 27 insertions(+)
>
> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> index 67aa3d039b9b..6ee97222cdad 100644
> --- a/drivers/usb/core/hcd.c
> +++ b/drivers/usb/core/hcd.c
> @@ -50,6 +50,7 @@
>  #include <linux/usb/otg.h>
>  
>  #include "usb.h"
> +#include "phy.h"
>  
>  
>  /*-------------------------------------------------------------------------*/
> @@ -2271,6 +2272,8 @@ int hcd_bus_suspend(struct usb_device *rhdev, 
> pm_message_t msg)
>               usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
>               hcd->state = HC_STATE_SUSPENDED;
>  
> +             usb_phy_roothub_power_off(hcd->phy_roothub);
> +

For system-suspend it should be ok.
But, in case of runtime/auto suspend, I think PHYs shouldn't be powered off.
Should we have check for that like-

if (!PMSG_IS_AUTO(msg))
    usb_phy_roothub_power_off()

Similar check in hcd_bus_resume?


>               /* Did we race with a root-hub wakeup event? */
>               if (rhdev->do_remote_wakeup) {
>                       char    buffer[6];
> @@ -2307,6 +2310,11 @@ int hcd_bus_resume(struct usb_device *rhdev, 
> pm_message_t msg)
>               dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
>               return 0;
>       }
> +
> +     status = usb_phy_roothub_power_on(hcd->phy_roothub);
> +     if (status)
> +             return status;
> +

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to