Hi ,
vhci-hcd kernel oops when attaching a mass storage on 4.13.13.
When I try to attach a mass storage device to a vhci-hcd, it generates an
oops. no problem with other devices.
A second user had also confirmed on a different hardware ( https://
bugs.debian.org/cgi-bin/bugreport.cgi?bug=878866)
debian's bug report attached bellow.
steps to reproduce with debian :
On server (debian stable running kernel 4.9) :
modprobe usbip-core
modprobe usbip-host
usbipd -D
usbip bind -b bus
On client (debian sid running kernel 4.13):
modprobe usbip-core
modprobe vhci-hcd
usbsip attach -b bus -r serverip
config values :
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=4
CONFIG_USBIP_VHCI_NR_HCS=8
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
oops content :
Kernel failure message 1:
------------[ cut here ]------------
invalid opcode: 0000 [#1] SMP
Modules linked in: uas usb_storage bnep btusb btrtl btbcm btintel bluetooth
drbg ansi_cprng ecdh_generic hid_generic usbhid hid vhci_hcd usbip_core ctr
ccm snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq
snd_seq_device ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4
nf_nat ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
nf_conntrack libcrc32c cpufreq_conservative cpufreq_userspace iptable_filter
cpufreq_powersave binfmt_misc arc4 ath5k ath mac80211 snd_hda_codec_hdmi
snd_hda_codec_realtek cfg80211 snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core powernow_k8 edac_mce_amd snd_hwdep snd_pcm_oss
kvm_amd snd_mixer_oss kvm snd_pcm acer_wmi pcmcia snd_timer yenta_socket snd
sparse_keymap rfkill irqbypass pcmcia_rsrc pcmcia_core
soundcore k8temp pcspkr joydev serio_raw sg ac shpchp battery evdev cuse fuse
loop parport_pc ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 mbcache
jbd2 crc32c_generic fscrypto crypto_simd glue_helper cryptd aes_x86_64 ecb cbc
algif_skcipher af_alg dm_crypt dm_mod sd_mod ohci_pci 8139too psmouse
ata_generic sdhci_pci sdhci mmc_core 8139cp mii pata_atiixp i2c_piix4 video
amdkfd ehci_pci ohci_hcd ehci_hcd sata_sil usbcore usb_common wmi radeon
libata i2c_algo_bit ttm scsi_mod thermal drm_kms_helper drm button
CPU: 1 PID: 1826 Comm: usb-storage Not tainted 4.13.13-falcot #2
Hardware name: Acer Aspire 5100 /Navarro, BIOS V3.13
08/22/2008
task: ffff9da063aea240 task.stack: ffffb8c1807cc000
RIP: 0010:vhci_urb_enqueue+0x2d6/0x4b0 [vhci_hcd]
RSP: 0018:ffffb8c1807cfc00 EFLAGS: 00010206
RAX: 0000000000000024 RBX: ffff9da065607000 RCX: ffff9da065607000
RDX: 0000000001400000 RSI: ffff9da067dc1300 RDI: ffff9da065607000
RBP: 0000000000000002 R08: 0000000000000024 R09: 0000000000022618
R10: ffffb8c1807cfcf0 R11: 00000112f55f46a0 R12: ffff9da069a03c00
R13: 0000000000000002 R14: ffff9da067dc1300 R15: ffff9d9fffbc0098
FS: 0000000000000000(0000) GS:ffff9da06fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f07c84ef740 CR3: 000000012a062000 CR4: 00000000000006e0
Call Trace:
? usb_hcd_submit_urb+0xab/0xac0 [usbcore]
? __kmalloc+0x1cc/0x5c0
? usb_alloc_urb+0x15/0x40 [usbcore]
? usb_sg_init+0x99/0x2b0 [usbcore]
? usb_sg_wait+0x93/0x170 [usbcore]
? usb_stor_bulk_transfer_sglist.part.1+0x63/0xb0 [usb_storage]
? usb_stor_bulk_srb+0x49/0x80 [usb_storage]
? usb_stor_Bulk_transport+0x163/0x3d0 [usb_storage]
? usb_stor_disconnect+0xc0/0xc0 [usb_storage]
? usb_stor_invoke_transport+0x37/0x4e0 [usb_storage]
? usb_stor_disconnect+0xc0/0xc0 [usb_storage]
? wait_for_completion_interruptible+0x145/0x1e0
? wait_for_completion_interruptible+0x176/0x1e0
? wake_up_q+0x70/0x70
? usb_stor_control_thread+0x169/0x280 [usb_storage]
? kthread+0x118/0x130
? kthread_create_on_node+0x70/0x70
? ret_from_fork+0x25/0x30
Code: f1 48 89 fa 48 c7 c6 e0 3c f4 c0 48 c7 c7 90 5f f4 c0 e8 1e e9 23 e1 e9
7a fd ff ff 41 8b 86 88 00 00 00 85 c0 0f 84 84 fd ff ff <0f> 0b 48 c7 c6 16
2c f4 c0 4c 89 ff e8 d9 9b 36 e1 4c 89 f6 48
---[ end trace d94b6115942793e3 ]---
Kernel failure message 2:
------------[ cut here ]------------
invalid opcode: 0000 [#1] SMP
Modules linked in: uas usb_storage ctr ccm vhci_hcd usbip_core snd_hrtimer
snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat
ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
nf_conntrack cpufreq_conservative cpufreq_userspace libcrc32c
cpufreq_powersave iptable_filter binfmt_misc arc4 ath5k ath mac80211
snd_hda_codec_hdmi snd_hda_codec_realtek cfg80211 snd_hda_codec_generic
snd_hda_intel snd_hda_codec powernow_k8 edac_mce_amd kvm_amd snd_hda_core kvm
snd_hwdep snd_pcm_oss snd_mixer_oss acer_wmi snd_pcm irqbypass sparse_keymap
rfkill pcmcia joydev k8temp yenta_socket serio_raw pcspkr pcmcia_rsrc
pcmcia_core snd_timer shpchp snd soundcore sg ac battery evdev cuse fuse loop
parport_pc
ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2
crc32c_generic fscrypto crypto_simd glue_helper cryptd aes_x86_64 ecb cbc
algif_skcipher af_alg sd_mod dm_crypt dm_mod ata_generic ohci_pci 8139too
psmouse sdhci_pci sdhci mmc_core sata_sil 8139cp mii pata_atiixp libata
i2c_piix4 ehci_pci scsi_mod ohci_hcd ehci_hcd usbcore usb_common video wmi
amdkfd radeon i2c_algo_bit ttm drm_kms_helper thermal drm button
CPU: 0 PID: 4409 Comm: usb-storage Not tainted 4.13.13-falcot #2
Hardware name: Acer Aspire 5100 /Navarro, BIOS V3.13
08/22/2008
task: ffff9823e55e4180 task.stack: ffffb9c0c16a0000
RIP: 0010:vhci_urb_enqueue+0x2d6/0x4b0 [vhci_hcd]
RSP: 0018:ffffb9c0c16a3c00 EFLAGS: 00010206
RAX: 0000000000000024 RBX: ffff9823e5a80800 RCX: ffff9823e5a80800
RDX: 0000000001400000 RSI: ffff9823cab52180 RDI: ffff9823e5a80800
RBP: 0000000000000001 R08: 0000000000000024 R09: 0000000000022618
R10: ffffb9c0c16a3cf0 R11: 0000000000000000 R12: ffff9823e6352d00
R13: 0000000000000001 R14: ffff9823cab52180 R15: ffff9823e9a14898
FS: 0000000000000000(0000) GS:ffff9823efc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f846fe24740 CR3: 0000000105bf7000 CR4: 00000000000006f0
Call Trace:
? usb_hcd_submit_urb+0xab/0xac0 [usbcore]
? __kmalloc+0x1cc/0x5c0
? usb_alloc_urb+0x15/0x40 [usbcore]
? usb_sg_init+0x99/0x2b0 [usbcore]
? usb_sg_wait+0x93/0x170 [usbcore]
? usb_stor_bulk_transfer_sglist.part.1+0x63/0xb0 [usb_storage]
? usb_stor_bulk_srb+0x49/0x80 [usb_storage]
? usb_stor_Bulk_transport+0x163/0x3d0 [usb_storage]
? usb_stor_disconnect+0xc0/0xc0 [usb_storage]
? usb_stor_invoke_transport+0x37/0x4e0 [usb_storage]
? usb_stor_disconnect+0xc0/0xc0 [usb_storage]
? wait_for_completion_interruptible+0x145/0x1e0
? wait_for_completion_interruptible+0x176/0x1e0
? wake_up_q+0x70/0x70
? usb_stor_control_thread+0x169/0x280 [usb_storage]
? kthread+0x118/0x130
? kthread_create_on_node+0x70/0x70
? ret_from_fork+0x25/0x30
Code: f1 48 89 fa 48 c7 c6 e0 5c e0 c0 48 c7 c7 90 7f e0 c0 e8 1e c9 97 cf e9
7a fd ff ff 41 8b 86 88 00 00 00 85 c0 0f 84 84 fd ff ff <0f> 0b 48 c7 c6 16
4c e0 c0 4c 89 ff e8 d9 7b aa cf 4c 89 f6 48
---[ end trace e8b43e3e0069ba6d ]---
Kernel failure message 1:
------------[ cut here ]------------
invalid opcode: 0000 [#1] SMP
Modules linked in: uas usb_storage bnep btusb btrtl btbcm btintel bluetooth
drbg ansi_cprng ecdh_generic hid_generic usbhid hid vhci_hcd usbip_core ctr
ccm snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq
snd_seq_device ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4
nf_nat ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
nf_conntrack libcrc32c cpufreq_conservative cpufreq_userspace iptable_filter
cpufreq_powersave binfmt_misc arc4 ath5k ath mac80211 snd_hda_codec_hdmi
snd_hda_codec_realtek cfg80211 snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core powernow_k8 edac_mce_amd snd_hwdep snd_pcm_oss
kvm_amd snd_mixer_oss kvm snd_pcm acer_wmi pcmcia snd_timer yenta_socket snd
sparse_keymap rfkill irqbypass pcmcia_rsrc pcmcia_core
soundcore k8temp pcspkr joydev serio_raw sg ac shpchp battery evdev cuse fuse
loop parport_pc ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 mbcache
jbd2 crc32c_generic fscrypto crypto_simd glue_helper cryptd aes_x86_64 ecb cbc
algif_skcipher af_alg dm_crypt dm_mod sd_mod ohci_pci 8139too psmouse
ata_generic sdhci_pci sdhci mmc_core 8139cp mii pata_atiixp i2c_piix4 video
amdkfd ehci_pci ohci_hcd ehci_hcd sata_sil usbcore usb_common wmi radeon
libata i2c_algo_bit ttm scsi_mod thermal drm_kms_helper drm button
CPU: 1 PID: 1826 Comm: usb-storage Not tainted 4.13.13-falcot #2
Hardware name: Acer Aspire 5100 /Navarro, BIOS V3.13
08/22/2008
task: ffff9da063aea240 task.stack: ffffb8c1807cc000
RIP: 0010:vhci_urb_enqueue+0x2d6/0x4b0 [vhci_hcd]
RSP: 0018:ffffb8c1807cfc00 EFLAGS: 00010206
RAX: 0000000000000024 RBX: ffff9da065607000 RCX: ffff9da065607000
RDX: 0000000001400000 RSI: ffff9da067dc1300 RDI: ffff9da065607000
RBP: 0000000000000002 R08: 0000000000000024 R09: 0000000000022618
R10: ffffb8c1807cfcf0 R11: 00000112f55f46a0 R12: ffff9da069a03c00
R13: 0000000000000002 R14: ffff9da067dc1300 R15: ffff9d9fffbc0098
FS: 0000000000000000(0000) GS:ffff9da06fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f07c84ef740 CR3: 000000012a062000 CR4: 00000000000006e0
Call Trace:
? usb_hcd_submit_urb+0xab/0xac0 [usbcore]
? __kmalloc+0x1cc/0x5c0
? usb_alloc_urb+0x15/0x40 [usbcore]
? usb_sg_init+0x99/0x2b0 [usbcore]
? usb_sg_wait+0x93/0x170 [usbcore]
? usb_stor_bulk_transfer_sglist.part.1+0x63/0xb0 [usb_storage]
? usb_stor_bulk_srb+0x49/0x80 [usb_storage]
? usb_stor_Bulk_transport+0x163/0x3d0 [usb_storage]
? usb_stor_disconnect+0xc0/0xc0 [usb_storage]
? usb_stor_invoke_transport+0x37/0x4e0 [usb_storage]
? usb_stor_disconnect+0xc0/0xc0 [usb_storage]
? wait_for_completion_interruptible+0x145/0x1e0
? wait_for_completion_interruptible+0x176/0x1e0
? wake_up_q+0x70/0x70
? usb_stor_control_thread+0x169/0x280 [usb_storage]
? kthread+0x118/0x130
? kthread_create_on_node+0x70/0x70
? ret_from_fork+0x25/0x30
Code: f1 48 89 fa 48 c7 c6 e0 3c f4 c0 48 c7 c7 90 5f f4 c0 e8 1e e9 23 e1 e9
7a fd ff ff 41 8b 86 88 00 00 00 85 c0 0f 84 84 fd ff ff <0f> 0b 48 c7 c6 16
2c f4 c0 4c 89 ff e8 d9 9b 36 e1 4c 89 f6 48
---[ end trace d94b6115942793e3 ]---
Kernel failure message 2:
------------[ cut here ]------------
invalid opcode: 0000 [#1] SMP
Modules linked in: uas usb_storage ctr ccm vhci_hcd usbip_core snd_hrtimer
snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat
ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack
nf_conntrack cpufreq_conservative cpufreq_userspace libcrc32c
cpufreq_powersave iptable_filter binfmt_misc arc4 ath5k ath mac80211
snd_hda_codec_hdmi snd_hda_codec_realtek cfg80211 snd_hda_codec_generic
snd_hda_intel snd_hda_codec powernow_k8 edac_mce_amd kvm_amd snd_hda_core kvm
snd_hwdep snd_pcm_oss snd_mixer_oss acer_wmi snd_pcm irqbypass sparse_keymap
rfkill pcmcia joydev k8temp yenta_socket serio_raw pcspkr pcmcia_rsrc
pcmcia_core snd_timer shpchp snd soundcore sg ac battery evdev cuse fuse loop
parport_pc
ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2
crc32c_generic fscrypto crypto_simd glue_helper cryptd aes_x86_64 ecb cbc
algif_skcipher af_alg sd_mod dm_crypt dm_mod ata_generic ohci_pci 8139too
psmouse sdhci_pci sdhci mmc_core sata_sil 8139cp mii pata_atiixp libata
i2c_piix4 ehci_pci scsi_mod ohci_hcd ehci_hcd usbcore usb_common video wmi
amdkfd radeon i2c_algo_bit ttm drm_kms_helper thermal drm button
CPU: 0 PID: 4409 Comm: usb-storage Not tainted 4.13.13-falcot #2
Hardware name: Acer Aspire 5100 /Navarro, BIOS V3.13
08/22/2008
task: ffff9823e55e4180 task.stack: ffffb9c0c16a0000
RIP: 0010:vhci_urb_enqueue+0x2d6/0x4b0 [vhci_hcd]
RSP: 0018:ffffb9c0c16a3c00 EFLAGS: 00010206
RAX: 0000000000000024 RBX: ffff9823e5a80800 RCX: ffff9823e5a80800
RDX: 0000000001400000 RSI: ffff9823cab52180 RDI: ffff9823e5a80800
RBP: 0000000000000001 R08: 0000000000000024 R09: 0000000000022618
R10: ffffb9c0c16a3cf0 R11: 0000000000000000 R12: ffff9823e6352d00
R13: 0000000000000001 R14: ffff9823cab52180 R15: ffff9823e9a14898
FS: 0000000000000000(0000) GS:ffff9823efc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f846fe24740 CR3: 0000000105bf7000 CR4: 00000000000006f0
Call Trace:
? usb_hcd_submit_urb+0xab/0xac0 [usbcore]
? __kmalloc+0x1cc/0x5c0
? usb_alloc_urb+0x15/0x40 [usbcore]
? usb_sg_init+0x99/0x2b0 [usbcore]
? usb_sg_wait+0x93/0x170 [usbcore]
? usb_stor_bulk_transfer_sglist.part.1+0x63/0xb0 [usb_storage]
? usb_stor_bulk_srb+0x49/0x80 [usb_storage]
? usb_stor_Bulk_transport+0x163/0x3d0 [usb_storage]
? usb_stor_disconnect+0xc0/0xc0 [usb_storage]
? usb_stor_invoke_transport+0x37/0x4e0 [usb_storage]
? usb_stor_disconnect+0xc0/0xc0 [usb_storage]
? wait_for_completion_interruptible+0x145/0x1e0
? wait_for_completion_interruptible+0x176/0x1e0
? wake_up_q+0x70/0x70
? usb_stor_control_thread+0x169/0x280 [usb_storage]
? kthread+0x118/0x130
? kthread_create_on_node+0x70/0x70
? ret_from_fork+0x25/0x30
Code: f1 48 89 fa 48 c7 c6 e0 5c e0 c0 48 c7 c7 90 7f e0 c0 e8 1e c9 97 cf e9
7a fd ff ff 41 8b 86 88 00 00 00 85 c0 0f 84 84 fd ff ff <0f> 0b 48 c7 c6 16
4c e0 c0 4c 89 ff e8 d9 7b aa cf 4c 89 f6 48
---[ end trace e8b43e3e0069ba6d ]---
keywords: usbip, mass storage device, oops
Regards,
---------- Forwarded Message ----------
Subject: Bug#883345: vhci-hcd: kernel oops when attaching thumb drive on
client side of usbip [usb2]
Date: Saturday, 2 December 2017, 20:04:04 IST
From: Boris Shtrasman <borissh1983+b...@gmail.com>
To: Debian Bug Tracking System <sub...@bugs.debian.org>
Package: src:linux
Version: 4.13.13-1
Dear Maintainer,
* What led up to the situation?
Attaching a thumbdrive (usb disk on key) - there is no issue when attaching
other devices such as mice or modems.
I have tried several different ports on the server (all had been in the
form of 1-1.x )
The device only have usb2, and the thumbdrive should be also usb2. I
have tested several different thumb drives all have caused oopses.
the thumb drive work without any issue when connected locally.
* What exactly did you do (or not do) that was effective (or
ineffective)?
rebuild kernel 4.13 (source via apt-get source ) with enabled usbip in
config.
on server (debian stable running kernel 4.9):
modprobe usbip-core
modprobe usbip-host
usbipd -D
usbip bind -b bus
on client (debian sid running kernel 4.13):
modprobe usbip-core
modprobe vhci-hcd
usbsip attach -b bus -r serverip
* What was the outcome of this action?
kernel oops
* What outcome did you expect instead?
new device under /dev and no kernel oops.
To enable usbip I had to change the config and rebuild kernel.
the changes I did had been (that is a debian specific issue that this
setting need to be changed c.f. usbip debian bug):
< CONFIG_USBIP_VHCI_HC_PORTS=31
---
> CONFIG_USBIP_VHCI_HC_PORTS=4
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Acer
product_name: Aspire 5100
product_version: V3.13
chassis_vendor: Acer
chassis_version: N/A
bios_vendor: Acer
bios_version: V3.13
board_vendor: Acer
board_name: Navarro
board_version: N/A
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RS480/
RS482/RS485 Host Bridge [1002:5950] (rev 10)
Subsystem: Acer Incorporated [ALI] RS480/RS482/RS485 Host Bridge
[1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx
PCI Bridge [int gfx] [1002:5a3f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx
PCI Express Port 1 [1002:5a36] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f01fffff
Prefetchable memory behind bridge: 00000000f0500000-00000000f06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RC4xx/RS4xx
PCI Express Port 2 [1002:5a37] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0700000-f08fffff
Prefetchable memory behind bridge: 00000000f0900000-00000000f0afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:12.0 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 Serial ATA
Controller [1002:4379]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
NUMA node: 0
Region 0: I/O ports at 8440 [size=8]
Region 1: I/O ports at 8434 [size=4]
Region 2: I/O ports at 8438 [size=8]
Region 3: I/O ports at 8430 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: Memory at f0407000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at f0480000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil, ata_generic
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] IXP
SB4x0 USB Host Controller [1002:4374] (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] IXP SB4x0 USB Host Controller
[1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: Memory at f0404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] IXP
SB4x0 USB Host Controller [1002:4375] (rev 80) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] IXP SB4x0 USB Host Controller
[1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: Memory at f0405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] IXP
SB4x0 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] IXP SB4x0 USB2 Host Controller
[1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: Memory at f0406000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0 SMBus
Controller [1002:4372] (rev 83)
Subsystem: Acer Incorporated [ALI] IXP SB4x0 SMBus Controller
[1025:009f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Region 0: I/O ports at 8410 [size=16]
Region 1: Memory at f0407400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
IDE Controller [1002:4376] (rev 80) (prog-if 82 [Master PriP])
Subsystem: Acer Incorporated [ALI] IXP SB4x0 IDE Controller [1025:009f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 8420 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, ata_generic
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
High Definition Audio Controller [1002:437b] (rev 01)
Subsystem: Acer Incorporated [ALI] IXP SB4x0 High Definition Audio
Controller [1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
PCI-ISA Bridge [1002:4377] (rev 80)
Subsystem: Acer Incorporated [ALI] IXP SB4x0 PCI-ISA Bridge [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
NUMA node: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB4x0
PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
NUMA node: 0
Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f0300000-f03fffff
Prefetchable memory behind bridge: f4000000-fbffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/
Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/
Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/
Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/
Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
NUMA node: 0
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/
ATI] RS482M [Mobility Radeon Xpress 200] [1002:5975] (prog-if 00 [VGA
controller])
Subsystem: Acer Incorporated [ALI] RS482M [Mobility Radeon Xpress 200]
[1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
NUMA node: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at f0200000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeonfb, radeon
06:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
Subsystem: Acer Incorporated [ALI] RTL-8100/8101L/8139 PCI Fast
Ethernet
Adapter [1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
NUMA node: 0
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at f0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
06:02.0 Ethernet controller [0200]: Qualcomm Atheros AR2413/AR2414 Wireless
Network Adapter [AR5005G(S) 802.11bg] [168c:001a] (rev 01)
Subsystem: AMBIT Microsystem Corp. AR2413/AR2414 Wireless Network
Adapter
[AR5005G(S) 802.11bg] [1468:0418]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
NUMA node: 0
Region 0: Memory at f0310000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
Kernel modules: ath5k
06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller
[1524:1412] (rev 10)
Subsystem: Acer Incorporated [ALI] CB-712/4 Cardbus Controller
[1025:009f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
NUMA node: 0
Region 0: Memory at f0301000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
Memory window 0: f4000000-f7ffffff (prefetchable)
Memory window 1: f0c00000-f0ffffff
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card
Reader Controller [1524:0530] (rev 01)
Subsystem: Acer Incorporated [ALI] ENE PCI Memory Stick Card Reader
Controller [1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
NUMA node: 0
Region 0: Memory at f0300400 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital
Card Reader Controller [1524:0550] (rev 01) (prog-if 01)
Subsystem: Acer Incorporated [ALI] ENE PCI Secure Digital Card Reader
Controller [1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 18000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 23
NUMA node: 0
Region 0: Memory at f0300800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology
Inc: [1524:0520] (rev 01)
Subsystem: Acer Incorporated [ALI] FLASH memory: ENE Technology Inc:
[1025:009f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
NUMA node: 0
Region 0: Memory at f0300c00 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller
[1524:0551] (rev 01)
Subsystem: Acer Incorporated [ALI] SD/MMC Card Reader Controller
[1025:009f]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
NUMA node: 0
Region 0: Memory at f0300100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
** USB devices:
Bus 019 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 018 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 017 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 016 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 015 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 014 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 013 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 012 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (901, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.13.13-falcot (SMP w/2 CPU cores)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.13.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.130
ii kmod 24-1
ii linux-base 4.5
Versions of packages linux-image-4.13.0-1-amd64 recommends:
pn apparmor <none>
ii firmware-linux-free 3.4
ii irqbalance 1.2.0-0.2
Versions of packages linux-image-4.13.0-1-amd64 suggests:
ii debian-kernel-handbook 1.0.18
ii grub-pc 2.02-2
pn linux-doc-4.13 <none>
Versions of packages linux-image-4.13.0-1-amd64 is related to:
ii firmware-amd-graphics 20170823-1
ii firmware-atheros 20170823-1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20170823-1
ii firmware-misc-nonfree 20170823-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20170823-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- debconf-show failed
-----------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
