On Thu, Dec 21, 2017 at 05:49:45PM +0800, Ji-Ze Hong (Peter Hong) wrote:
> Hi Johan,
>
> Johan Hovold 於 2017/12/19 上午 12:06 寫道:
> > On Thu, Nov 16, 2017 at 03:46:08PM +0800, Ji-Ze Hong (Peter Hong) wrote:
> >> +static int f81534_set_port_output_pin(struct usb_serial_port *port)
> >> +{
> >> + struct f81534_serial_private *serial_priv;
> >> + struct f81534_port_private *port_priv;
> >> + struct usb_serial *serial;
> >> + const struct f81534_port_out_pin *pins;
> >> + int status;
> >> + int i;
> >> + u8 value;
> >> + u8 idx;
> >> +
> >> + serial = port->serial;
> >> + serial_priv = usb_get_serial_data(serial);
> >> + port_priv = usb_get_serial_port_data(port);
> >> +
> >> + idx = F81534_CONF_GPIO_OFFSET + port_priv->phy_num;
> >> + value = serial_priv->conf_data[idx];
> >> + pins = &f81534_port_out_pins[port_priv->phy_num];
> >> +
> >> + for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) {
> >> + status = f81534_set_mask_register(serial,
> >> + pins->pin[i].reg_addr, pins->pin[i].reg_mask,
> >> + value & BIT(i) ? pins->pin[i].reg_mask : 0);
> >> + if (status)
> >> + return status;
> >> + }
> >
> > You're using 24 (get or set) accesses to update these three registers
> > here. Why not read them out (if necessary), determine their new values
> > and then write them back when done instead?
> >
>
> In this code, I'm only read/write 3 registers of 0x2ae8, 0x2a90, 0x2a80,
> but some register will read/write more than once. Should I change the
> code from port_probe() to attach() and re-write it as:
> 1: read the 3 register
> 2: change them will 12 pin desire value
> 3: write it back
> Is it ok?
Do you expect these pins to ever be changed after probe? If not, then
perhaps it can be moved to attach(), but otherwise I guess they should
be set at port_probe(). By using shadow registers, you should be able to
reduce the number of device accesses, but perhaps it's not worth the
complexity.
Do you have a rough idea about how long these register updates take? I
was just worried that these changes will add up to really long probe
times.
Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
