Hi,
On Wednesday 03 January 2018 04:58 PM, Manu Gautam wrote:
> Add following USB speed related PHY modes:
> LS (Low Speed), FS (Full Speed), HS (High Speed), SS (Super Speed)
>
> Speed related information is required by some QCOM PHY drivers
> to program PHY monitor resume/remote-wakeup events in suspended
> state. Speed is needed in order to set correct polarity of wakeup
> events for detection. E.g. QUSB2 PHY monitors DP/DM line state
> depending on whether speed is LS or FS/HS to detect resume.
> Similarly QMP USB3 PHY in SS mode should monitor RX terminations
> attach/detach and LFPS events depending on SSPHY is active or not.
>
> Signed-off-by: Manu Gautam <mgau...@codeaurora.org>
> ---
> drivers/phy/phy-core.c | 15 +++++++++++++++
> include/linux/phy/phy.h | 32 ++++++++++++++++++++++++--------
> 2 files changed, 39 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> index b4964b0..e4f0525 100644
> --- a/drivers/phy/phy-core.c
> +++ b/drivers/phy/phy-core.c
> @@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
> }
> EXPORT_SYMBOL_GPL(phy_set_mode);
>
> +enum phy_mode phy_get_mode(struct phy *phy)
> +{
> + enum phy_mode ret;
> +
> + if (!phy || !phy->ops->get_mode)
> + return PHY_MODE_INVALID;
> +
> + mutex_lock(&phy->mutex);
> + ret = phy->ops->get_mode(phy);
Since get_mode only has to return the phy mode, there is no need for an ops
here. Just add phy_mode in phy_attrs in set_mode and return it here.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
