On Tue, 4 Feb 2003 13:24:52 -0500
Matthew Carpenter <[EMAIL PROTECTED]> wrote:
> I have installed both already... but I don't have a file to access the
> camera with (such as /dev/ttyS0 and such) This would help.
>
> Here is what I get in the log:
> Feb 4 13:20:39 gandalf kernel: hub.c: USB new device connect on bus1/1,
> assigned device number 10 Feb 4 13:20:40 gandalf kernel: mdc800.c:
> Found Mustek MDC800 on USB.
It probably does create the file. It is NOT in /dev. In the case above, I
would expect it to be something like /proc/bus/usb/001/010
That is the device that programs will be opening. Not anything in /dev.
BTW, if you look for what file systems are mounted (run mount), does it
print:
usbdevfs on /proc/bus/usb type usbdevfs (rw)
For this to work, this is a requirement.
--
+····························+·······························+
· Roger Oberholtzer · E-mail: [EMAIL PROTECTED] ·
· OPQ Systems AB · WWW: http://www.opq.se/ ·
· Erik Dahlbergsgatan 41-43 · Phone: Int + 46 8 314223 ·
· 115 34 Stockholm · Mobile: Int + 46 733 621657 ·
· Sweden · Fax: Int + 46 8 302602 ·
+····························+·······························+
_______________________________________________
Linux-users mailing list
[EMAIL PROTECTED]
Unsubscribe/Suspend/Etc -> http://www.linux-sxs.org/mailman/listinfo/linux-users
