Jerry, It is the latest included with the 2.4.16 kernel. I do have a CD with instructions on compiling the driver for linux that came with the card. It is dated 6/1999. Should I compile it and see if it works?
Regards, Keith B. Jerry McBride <[EMAIL PROTECTED]> wrote: >On Tue, 11 Dec 2001 22:27:40 -0500 >[EMAIL PROTECTED] wrote: > >> Hello All, >> >> I have followed the thread on forcing my NIC to run full duplex. I have >> tried all of those suggestions to no avail. I have SuSE 7.3 Pro installed >> on my desktop w/KDE-2.2.2, and Mantel's 2.4.16-4GB-14. Using mii-tool >> I get 10 bit half duplex no link. If I boot the same machine under COL 3.1 >> w/ 2.4.4 kernel and KDE 2.1.1, mii-tool shows the card running @ 100 mb >> full duplex. The card is an SMC1244TX (realtek 8139c chipset). Whatis >> interfering under SuSE? Is the realtek module buggy in 7.3? I have it >> set as eth0 rtl8139 in /etc/modules.conf. >> > >Perhaps it's an old realtec nic driver holding you back? > >-- > >**************************************************************************** >** > Registered Linux User Number 185956 > http://groups.google.com/groups?hl=en&safe=off&group=linux > 6:40am up 10 days, 17:41, 3 users, load average: 0.42, 0.35, 0.28 > >_______________________________________________ >Linux-users mailing list >Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users > _______________________________________________ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
