Dave, Thanks, I've tried that and it initializes the modem but never dials before it fails.
Regards, Keith B. Dave Anselmi <[EMAIL PROTECTED]> wrote: >[EMAIL PROTECTED] wrote: > >[...] > > >> 00:07.6 Communication controller: VIA Technologies, Inc. AC97 Modem Controller (rev >30) >> Subsystem: VIA Technologies, Inc. AC97 Modem Controller >> Flags: medium devsel, IRQ 3 >> I/O ports at dc00 [size=256] >> Capabilities: [d0] Power Management version 2 > >This would be the modem. I had thought that AMR modems were worse than Winmodems - >there is practically no >hardware on the AMR board so everything is being done on the motherboard. But I >could be wrong, the mobo hardware >may be Winmodem and it may be something better. > >In any case, I have a PCI internal modem. It looks like the above in /proc/pci, so >you can try using the IRQ and >I/O port with setserial to attach a ttyS? to it. Check the manpage, but it's >something like: > >setserial port dc00 irq 3 [other options as needed] ttyS2 > >Dave > > >_______________________________________________ >Linux-users mailing list - http://linux.nf/mailman/listinfo/linux-users >Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL. > _______________________________________________ Linux-users mailing list - http://linux.nf/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
