> > > > > Don't look in /var/log/messages or /var/log/dmesg. Use the dmesg > > > > > command directly. > > > > > > > > > > 1- Clear the kernel log with dmesg -c > > > > > 2- Insert the module with modprobe uvcvideo trace=15 > > > > > 3- Check the kernel log with dmesg to see if anything is wrong > > > > > 4- Plug in the webcam > > > > > 5- Check the kernel log again > > > > > > > > > > Laurent Pinchart > > > > > > > > Doing 3 after 1 and 2, i get the same that i got before with > > > > /var/log/dmesg. How do I plug in an integrated camera? > > > > > > Hmmm... that might be a bit difficult, right :-) > > > > > > > Does it make sense? Perhaps that is the problem. The driver is > > > > thougth > > > > to > > > > > > be loaded "before" the camera is plugged in, but that cannot be done > > > > in > > > > > > an obvious way. > > > > > > The driver can be loaded before or after plugging the camera, it just > > > shouldn't matter. You're having another issue here. > > > > > > Could you try with the driver from linux-uvc.berlios.de instead of the > > > Gentoo package ? > > > > Please first try to remove the driver before loading it with trace=15. If > > the > > driver is already loaded, modprobe will exit silently without raising the > > trace level. > > > > rmmod uvcvideo > > dmesg -c > > modprobe uvcvideo trace=15 > > > > Post the kernel log (dmesg) after the last command. > > I already tried before with modprobe -r uvcvideo. There is no change. Same > than the message DELL M1210...
Then please try to download the driver source code from linux-uvc.berlios.de instead of using the Gentoo package (you will need to checkout the code from SVN). Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel