Hi Mike, On Wednesday 30 January 2008, Michał Andrzej Woźniak wrote: > Hi guys > > I am trying to get ALI 5606 to work (ID 0402:5606) on Kubuntu 7.10 (Gutsy > Gibbon). > > The uvcvideo module (from SVN, rev173) compiled nicely and loads OK, but > does *not* print anything in dmesg/syslog upon loading. When I try to run > luvcview, I get: > > luvcview version 0.2.1 > Video driver: x11 > A window manager is available > video /dev/video0 > Unable to set format: 5. > Init v4L2 failed !! exit fatal > > ...regardless, what format and/or other settings I use. On syslog/dmesg I > ony get: > > uvcvideo: Failed to query (130) UVC control 1 (unit 0) : 2 (exp. 26). > > That is *very similar* to what has been described (and marked as solved!) > here: > http://lists.berlios.de/pipermail/linux-uvc-devel/2007-November/002486.html > > I even checked uvc_driver.c and I *do* have the lines as they should look > after the patch has been applied. So, most probably, I am missing something > very obvious. Or am I not?..
Please make sure you're really using the driver you compiled and not an older version installed with your distribution. Remove all occurrences of uvcvideo.ko in /lib/modules/<kernel_version> and reinstall the driver from sources. Best regards, Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel