Laurent Pinchart escreveu: > On Friday 14 November 2008, Paulo Assis wrote: > >> Michael, >> >> Dynamic controls need to be added to the driver first, and you will >> require admin rights for that. >> You can see examples of this on libwebcam: >> http://www.quickcamteam.net/software/libwebcam >> and guvcview: http://guvcview.berlios.de >> you will need to run them as root (sudo) once in order to add dynamic >> controls, like focus control. >> > > I'd like to add that libwebcam comes with a userspace application > (uvcdynctrl) > to should be udev and/or hal pluggable. > >
At least for Ubuntu some modifications on the udev script and rules are required, see Trevor Post: http://forums.quickcamteam.net/showthread.php?tid=392 (And even with these changes I still can't get cold plug to work, only hot plug) >> Also newer models of the pro 9000 (2008 model) use gspca driver and are >> not uvc compatible. >> > Are you sure about that ? > > Best regards, > > Laurent Pinchart > > Yes, I was wrong about this (see previous post), I knew there were problems with 3 generation cameras, and for some reason I had the impression that they weren't uvc compliant, but apparently the problems are caused by faulty firmware (the ASIC is different from the 2007 model), also some functionality like Raw Bayer was lost in these new models. Best Regards, Paulo _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
