Hi Thomas, On Monday 05 January 2009, Thomas Feil wrote: > Malte, > > I have the same cam. I run it on opensuse 11.0, works fine. > On opensuse 11.1, with default kernel drivers, I'm getting > limited resolution and framerate: > > luvcview 0....@opensuse 11.1 > ============================ > > SDL information > Video driver: x11 > A window manager is available > Device information > Device path: /dev/video0 > Stream settings: > File format: YUYV 8MJPG is not supported by device) > File size: 160x120 (reqested size 640x480 is not supported by device) > Frame rate: 15/2 fps (requested frame rate 30 fps is not supported by > device) > > luvcview 0....@opensuse 11.0 > ============================ > > SDL information: > Video driver: x11 > A window manager is available > Device information: > Device path: /dev/video0 > Stream settings: > Frame format: YUYV (MJPG is not supported by device) > Frame size: 640x480 > Frame rate: 30 fps > > I was wondering if you experience similar issues?
First of all, please check that the device is detected as a high-speed USB 2.0 peripheral and associated with the EHCI controller. You should get something similar to the following message in the kernel log: usb 5-1: new high speed USB device using ehci_hcd and address 6 If your camera is detected as a full speed device that would probably the cause of your problem. > P.S: Did you ever get mic to work? Yes but I haven't tried for quite a long time. Best regards, Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
