Philipp Kolmann wrote: > Jelle de Jong wrote: >> Hello everybody, >> >> I bought a Logitech QuickCam Pro 9000[1] (80euro) to make a budget >> free/libre open source live video recording systems from a laptop. But I >> am unable to get more then 5 frames per seconds (fps) out of the webcam >> under any resolution. The last 4 days I have been trying to get this >> system to work both with webcam and a digital video camera on combisite1 >> of a usb video grabber. >> >> The webcam only delivers 5 fps tops most time its lower is this normal >> and what to do about is, should I buy an other webcam and witch one? >> >> Please see the attachments for all good reports about fps and mencoder >> and mplayer commands. >> >> > It seems you use eeepc. Did you test the cam with another PC? Is your > USB Port 1.1 or 2.0 (check with usbview). > > I have several 9000 here and I don't have issues with debian and this cam. > You might want to get latest uvcvideo kernel module, but this cam is > supported for a long time already. > > hth, > Philipp
Hi Philipp, Thanks for responding, what version of the webcam do you have? I seem to have a got a 0.08 My ports are usb 2.0 I did not test it with an other pc I only have eeepc's around me. Is there a debian package for the latest uvcvideo kernel module? Could you test this command for me and show me the output: (especially fps) mencoder tv:// -tv driver=v4l2:device=/dev/video0:fps=5 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=2240:threads=2 -of rawvideo -o webcam4.mp4 Thanks in advance, Jelle de Jong _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
