Hi, 2010/11/23 <malef...@malefico3d.org>: > I'm using usb keyboard, wacom tablet, usb scanner and usb mouse. I tried > with scanner and wacom unplugged but still guvcview and kopete gives the > same (except that now camera is using /dev/video1 instead of /dev/video0)
This is a bit strange, do you have more than one video device ? What do you have now as /dev/video0 ? > > Is there any way to detect and fix the bandwidth problem ? check this thread: http://www.mail-archive.com/linux-usb-us...@lists.sourceforge.net/msg14838.html it may give you some pointers. Best regards, Paulo. > > Best regards > > Claudio > >> Hi, >> >> 2010/11/23 <malef...@malefico3d.org>: >>> Thanks Paulo, >>> >>> Yes, I have tried Guvcview and Kopete. The first one, when running from >>> terminal, gives me this: >>> >>> ------------- >>> vid:0458 >>> pid:7070 >>> driver:uvcvideo >>> checking format: 842094169 >>> fps is set to 1/20 >>> drawing controls >>> >>> libv4l2: error turning on stream: No space left on device >>> VIDIOC_STREAMON - Unable to start capture: No space left on device >> >> This looks like usb bandwidth issues, are you using any other devices >> with the same usb controller ? > > > _______________________________________________ > Linux-uvc-devel mailing list > Linux-uvc-devel@lists.berlios.de > https://lists.berlios.de/mailman/listinfo/linux-uvc-devel > _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
