Hi Justin,

On Thu, Aug 27, 2015 at 03:53:24PM -0700, Justin Chen wrote:
> Watchdog driver for Broadcom 7038 and newer chips.
> 
> Signed-off-by: Justin Chen <[email protected]>

Almost good. Two little but important details left ...

> ---
>  drivers/watchdog/Kconfig       |   8 ++
>  drivers/watchdog/Makefile      |   1 +
>  drivers/watchdog/bcm7038_wdt.c | 235 
> +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 244 insertions(+)
>  create mode 100644 drivers/watchdog/bcm7038_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 241fafd..4fbe8ab 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1291,6 +1291,14 @@ config BCM_KONA_WDT_DEBUG
>  
>         If in doubt, say 'N'.
>  
> +config BCM7038_WDT
> +     tristate "BCM7038 Watchdog"
> +     select WATCHDOG_CORE
> +     help
> +      Watchdog driver for the built-in hardware in Broadcom 7038 SoCs.
> +
> +      Say 'Y or 'M' here to enable the driver.
> +
>  config IMGPDC_WDT
>       tristate "Imagination Technologies PDC Watchdog Timer"
>       depends on HAS_IOMEM
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 59ea9a1..65d4169 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -66,6 +66,7 @@ obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
>  obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
>  obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
>  obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
> +obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
>  
>  # AVR32 Architecture
>  obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
> diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
> new file mode 100644
> index 0000000..5e54c1b
> --- /dev/null
> +++ b/drivers/watchdog/bcm7038_wdt.c
> @@ -0,0 +1,235 @@
> +/*
> + * Copyright (C) 2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/watchdog.h>
> +
> +#define WDT_START_1          0xff00
> +#define WDT_START_2          0x00ff
> +#define WDT_STOP_1           0xee00
> +#define WDT_STOP_2           0x00ee
> +
> +#define WDT_TIMEOUT_REG              0x0
> +#define WDT_CMD_REG          0x4
> +
> +#define WDT_MIN_TIMEOUT              1 /* seconds */
> +#define WDT_DEFAULT_TIMEOUT  30 /* seconds */
> +#define WDT_DEFAULT_RATE     27000000
> +
> +struct bcm7038_watchdog {
> +     void __iomem            *base;
> +     struct watchdog_device  wdd;
> +     u32                     rate;
> +     struct clk              *clk;
> +};
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +
> +static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog)
> +{
> +     struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
> +     u32 timeout;
> +
> +     timeout = wdt->rate * wdog->timeout;
> +
> +     writel(timeout, wdt->base + WDT_TIMEOUT_REG);
> +}
> +
> +static int bcm7038_wdt_ping(struct watchdog_device *wdog)
> +{
> +     struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
> +
> +     writel(WDT_START_1, wdt->base + WDT_CMD_REG);
> +     writel(WDT_START_2, wdt->base + WDT_CMD_REG);
> +
> +     return 0;
> +}
> +
> +static int bcm7038_wdt_start(struct watchdog_device *wdog)
> +{
> +     bcm7038_wdt_set_timeout_reg(wdog);
> +     bcm7038_wdt_ping(wdog);
> +
> +     return 0;
> +}
> +
> +static int bcm7038_wdt_stop(struct watchdog_device *wdog)
> +{
> +     struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
> +
> +     writel(WDT_STOP_1, wdt->base + WDT_CMD_REG);
> +     writel(WDT_STOP_2, wdt->base + WDT_CMD_REG);
> +
> +     return 0;
> +}
> +
> +static int bcm7038_wdt_set_timeout(struct watchdog_device *wdog,
> +                                unsigned int t)
> +{
> +     /* Can't modify timeout value if watchdog timer is running */
> +     bcm7038_wdt_stop(wdog);
> +     wdog->timeout = t;
> +     bcm7038_wdt_start(wdog);
> +
> +     return 0;
> +}
> +
> +static unsigned int bcm7038_wdt_get_timeleft(struct watchdog_device *wdog)
> +{
> +     struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
> +     u32 time_left;
> +
> +     time_left = readl(wdt->base + WDT_CMD_REG);
> +
> +     return time_left / wdt->rate;
> +}
> +
> +static struct watchdog_info bcm7038_wdt_info = {
> +     .identity       = "Broadcom BCM7038 Watchdog Timer",
> +     .options        = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> +                             WDIOF_MAGICCLOSE
> +};
> +
> +static struct watchdog_ops bcm7038_wdt_ops = {
> +     .owner          = THIS_MODULE,
> +     .start          = bcm7038_wdt_start,
> +     .stop           = bcm7038_wdt_stop,
> +     .set_timeout    = bcm7038_wdt_set_timeout,
> +     .get_timeleft   = bcm7038_wdt_get_timeleft,
> +};
> +
> +static int bcm7038_wdt_probe(struct platform_device *pdev)
> +{
> +     struct device *dev = &pdev->dev;
> +     struct bcm7038_watchdog *wdt;
> +     struct resource *res;
> +     int err;
> +
> +     wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> +     if (!wdt)
> +             return -ENOMEM;
> +
> +     platform_set_drvdata(pdev, wdt);
> +
> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +     wdt->base = devm_ioremap_resource(dev, res);
> +     if (IS_ERR(wdt->base))
> +             return PTR_ERR(wdt->base);
> +
> +     wdt->clk = devm_clk_get(dev, NULL);
> +     /* If unable to get clock, use default frequency */
> +     if (!IS_ERR(wdt->clk)) {
> +             clk_prepare_enable(wdt->clk);
> +             wdt->rate = clk_get_rate(wdt->clk);
> +             /* Prevent divide-by-zero exception */
> +             if (!wdt->rate)
> +                     wdt->rate = WDT_DEFAULT_RATE;
> +     } else {
> +             wdt->rate = WDT_DEFAULT_RATE;

                wdt->clk = NULL;

is needed here. Not all implementations of clk_disable_unprepare()
can handle the IS_ERR() case.

> +     }
> +
> +     wdt->wdd.info           = &bcm7038_wdt_info;
> +     wdt->wdd.ops            = &bcm7038_wdt_ops;
> +     wdt->wdd.min_timeout    = WDT_MIN_TIMEOUT;
> +     wdt->wdd.timeout        = WDT_DEFAULT_TIMEOUT;
> +     wdt->wdd.max_timeout    = 0xffffffff / wdt->rate;
> +     wdt->wdd.parent         = dev;
> +     watchdog_set_drvdata(&wdt->wdd, wdt);
> +
> +     err = watchdog_register_device(&wdt->wdd);
> +     if (err) {
> +             dev_err(dev, "Failed to register watchdog device\n");

                clk_disable_unprepare(wdt->clk);

> +             return err;
> +     }
> +
> +     dev_info(dev, "Registered BCM7038 Watchdog\n");
> +
> +     return 0;
> +}
> +
> +static int bcm7038_wdt_remove(struct platform_device *pdev)
> +{
> +     struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
> +
> +     if (!nowayout)
> +             bcm7038_wdt_stop(&wdt->wdd);
> +
> +     watchdog_unregister_device(&wdt->wdd);
> +     clk_disable_unprepare(wdt->clk);
> +
> +     return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int bcm7038_wdt_suspend(struct device *dev)
> +{
> +     struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
> +
> +     if (watchdog_active(&wdt->wdd))
> +             return bcm7038_wdt_stop(&wdt->wdd);
> +
> +     return 0;
> +}
> +
> +static int bcm7038_wdt_resume(struct device *dev)
> +{
> +     struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
> +
> +     if (watchdog_active(&wdt->wdd))
> +             return bcm7038_wdt_start(&wdt->wdd);
> +
> +     return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_ops, bcm7038_wdt_suspend,
> +                      bcm7038_wdt_resume);
> +
> +static void bcm7038_wdt_shutdown(struct platform_device *pdev)
> +{
> +     struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
> +
> +     if (watchdog_active(&wdt->wdd))
> +             bcm7038_wdt_stop(&wdt->wdd);
> +}
> +
> +static const struct of_device_id bcm7038_wdt_match[] = {
> +     { .compatible = "brcm,bcm7038-wdt" },
> +     {},
> +};
> +
> +static struct platform_driver bcm7038_wdt_driver = {
> +     .probe          = bcm7038_wdt_probe,
> +     .remove         = bcm7038_wdt_remove,
> +     .shutdown       = bcm7038_wdt_shutdown,
> +     .driver         = {
> +             .name           = "bcm7038-wdt",
> +             .of_match_table = bcm7038_wdt_match,
> +             .pm             = &bcm7038_wdt_pm_ops,
> +     }
> +};
> +module_platform_driver(bcm7038_wdt_driver);
> +
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started 
> (default="
> +     __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Driver for Broadcom 7038 SoCs Watchdog");
> +MODULE_AUTHOR("Justin Chen");
> -- 
> 2.1.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to