On 09/23/14 20:10, Michael Tokarev wrote:
23.09.2014 21:35, Arend van Spriel wrote:
On 09/23/14 18:02, Michael Tokarev wrote:
Oh. Indeed. While I enabled it, I recompiled only drivers/net/wireless,
but not net/. Rebuilt, another trace is here --
http://www.corpit.ru/mjt/tmp/brcmsmac-4313-trace-201409233.dat.gz
Thanks,
Just to confirm. With this trace you also get a stall during wget?
Yes. Initially it started d/loading but some time later the d/load speed
reduced to 0. It is possible to wait further, and after some more time
it will receive some more bytes/kilobytes/packets and stall again. Overall
progress is nearing zero.
I looked at the log. I see download commence because the packets
received of 1562 bytes length. So within one second I see little over
200 packets so approx. 3Mbps which is not impressive but I don't know
what can be expected. Indeed after that it stalls and we only seem to
receive small packets of 179 bytes that seem to end up in
cfg80211_mgmt_rx. It could be that the hardware is somehow bogged and
can not receive at higher modulations as management frames are
transmitted at lower rates. The hardware will drop packets that are
having FCS (aka. checksum) errors. The brcmsmac is missing some code to
read fcs error count from hardware, but I will get back to you with a
patch that we can use to confirm this.
Regards,
Arend
Thanks,
/mjt
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
