On 09/30/2014 05:27 AM, Michal Kazior wrote: > On 29 September 2014 18:05, Ben Greear <gree...@candelatech.com> wrote: >> On 09/29/2014 01:24 AM, Kalle Valo wrote: >>> gree...@candelatech.com writes: >>> >>>> From: Ben Greear <gree...@candelatech.com> >>>> >>>> This gives user-space a normal-ish way to detect that >>>> firmware has failed to start and that a reboot is >>>> probably required. >>>> >>>> Signed-off-by: Ben Greear <gree...@candelatech.com> > [...] >>>> - return 0; >>>> +out: >>>> + /* If we have failed to power-up, it may take a reboot to >>>> + * get the NIC back online. >>>> + * Set flag accordinly so that user-space can know. >>>> + */ >>>> + ar->fw_powerup_failed = !!ret; >>>> + return ret; >>>> } >>> >>> Would it be better to use ATH10K_STATE_WEDGED for this and then just >>> export the state value to user space? Or should we have two different >>> states, like FW_WEDGED and HW_WEDGED? > > Current WEDGED state is more like ON. It assumes mac80211 will call > ath10k_stop(). > > Adding another state just for the sake of handling power up / reset > issues seems like an overkill to me. > > >> I didn't want to mess with the state machine. This counter >> is just a clue to users that things might be badly wrong. Some systems >> might recover with another hard reset, some will hang the entire >> system hard, and some will just stick in this state unable to >> recover. Some of my systems exhibit this last behaviour, so at >> least with this patch I can warn the user that they need to >> reboot to regain wifi functionality. > > If power up fails the error should propagate to `ifconfig wlanX up` > (or whatever calling drv_start) eventually so I don't see the point in > having this counter.
Supplicant manages this, and programatically it is not at all easy to figure out that the network is failing to come up because the firmware is broken-and-can't-be-fixed-without-reboot. The counter I added can be queried by a management tool and propagate a clear error to the end user. Thanks, Ben -- Ben Greear <gree...@candelatech.com> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html