If MSI isn't configured device ROM program expects
legacy interrupts to be enabled before it can
fully boot. Don't forget to disable legacy
interrupts after that.
While at it re-use the legacy irq enabling helper
instead of calling ath10k_pci_write32().
Signed-off-by: Michal Kazior <michal.kaz...@tieto.com>
---
drivers/net/wireless/ath/ath10k/pci.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c
b/drivers/net/wireless/ath/ath10k/pci.c
index 730bb18..6077095 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2279,14 +2279,13 @@ static int ath10k_pci_wait_for_target_init(struct
ath10k *ar)
if (ar_pci->num_msi_intrs == 0)
/* Fix potential race by repeating CORE_BASE writes */
- ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
- PCIE_INTR_ENABLE_ADDRESS,
- PCIE_INTR_FIRMWARE_MASK |
- PCIE_INTR_CE_MASK_ALL);
+ ath10k_pci_enable_legacy_irq(ar);
mdelay(10);
} while (time_before(jiffies, timeout));
+ ath10k_pci_disable_and_clear_legacy_irq(ar);
+
if (val == 0xffffffff) {
ath10k_err(ar, "failed to read device register, device is
gone\n");
return -EIO;
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
