From: Sujith Manoharan <c_man...@qca.qualcomm.com>
Instead of using the sta_add()/sta_remove() callbacks,
use the sta_state() callback since this gives
more fine-grained control.
Signed-off-by: Sujith Manoharan <c_man...@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/main.c | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c
b/drivers/net/wireless/ath/ath9k/main.c
index 6f6a974..902807e 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1547,6 +1547,31 @@ static int ath9k_sta_remove(struct ieee80211_hw *hw,
return 0;
}
+static int ath9k_sta_state(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ enum ieee80211_sta_state old_state,
+ enum ieee80211_sta_state new_state)
+{
+ struct ath_softc *sc = hw->priv;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ int ret = 0;
+
+ if (old_state == IEEE80211_STA_AUTH &&
+ new_state == IEEE80211_STA_ASSOC) {
+ ret = ath9k_sta_add(hw, vif, sta);
+ ath_dbg(common, CONFIG,
+ "Add station: %pM\n", sta->addr);
+ } else if (old_state == IEEE80211_STA_ASSOC &&
+ new_state == IEEE80211_STA_AUTH) {
+ ret = ath9k_sta_remove(hw, vif, sta);
+ ath_dbg(common, CONFIG,
+ "Remove station: %pM\n", sta->addr);
+ }
+
+ return ret;
+}
+
static void ath9k_sta_set_tx_filter(struct ath_hw *ah,
struct ath_node *an,
bool set)
@@ -2471,8 +2496,7 @@ struct ieee80211_ops ath9k_ops = {
.remove_interface = ath9k_remove_interface,
.config = ath9k_config,
.configure_filter = ath9k_configure_filter,
- .sta_add = ath9k_sta_add,
- .sta_remove = ath9k_sta_remove,
+ .sta_state = ath9k_sta_state,
.sta_notify = ath9k_sta_notify,
.conf_tx = ath9k_conf_tx,
.bss_info_changed = ath9k_bss_info_changed,
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
