This will make it possible to easily support
different hardware with different uart pin
configuration.
Signed-off-by: Michal Kazior <michal.kaz...@tieto.com>
---
drivers/net/wireless/ath/ath10k/core.c | 3 ++-
drivers/net/wireless/ath/ath10k/core.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index 8bb1657..7c913cc 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -48,6 +48,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[]
= {
.id = QCA988X_HW_2_0_VERSION,
.name = "qca988x hw2.0",
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
@@ -698,7 +699,7 @@ static int ath10k_init_uart(struct ath10k *ar)
if (!uart_print)
return 0;
- ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, 7);
+ ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, ar->hw_params.uart_pin);
if (ret) {
ath10k_warn(ar, "could not enable UART prints (%d)\n", ret);
return ret;
diff --git a/drivers/net/wireless/ath/ath10k/core.h
b/drivers/net/wireless/ath/ath10k/core.h
index f1a3edd..0188c84 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -479,6 +479,7 @@ struct ath10k {
u32 id;
const char *name;
u32 patch_load_addr;
+ int uart_pin;
struct ath10k_hw_params_fw {
const char *dir;
const char *fw;
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
