The following patches add thermal sensor and thermal cooling device support in ath10k. For sensor, hwmon interface is used. For controlling temperature cooling device interface is used. For thermal mitigation, tx throttling is done using hw MAC quiet time setting.
WMI support for reading temperature is available from 10.2.4 firmware onwards. The firmware can be downloaded from https://github.com/kvalo/ath10k-firmware/tree/master/10.2.4/untested Rajkumar Manoharan (5): ath10k: add 10.2.4 firmware support ath10k: add wmi support for pdev_set_quiet_mode ath10k: add thermal cooling device support ath10k: add wmi interface for pdev_get_temperature ath10k: add thermal sensor device support drivers/net/wireless/ath/ath10k/Makefile | 1 + drivers/net/wireless/ath/ath10k/core.c | 20 ++- drivers/net/wireless/ath/ath10k/core.h | 8 + drivers/net/wireless/ath/ath10k/hw.h | 1 + drivers/net/wireless/ath/ath10k/thermal.c | 238 ++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/thermal.h | 58 ++++++++ drivers/net/wireless/ath/ath10k/wmi-ops.h | 39 +++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 3 + drivers/net/wireless/ath/ath10k/wmi.c | 62 ++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 20 ++- 10 files changed, 448 insertions(+), 2 deletions(-) create mode 100644 drivers/net/wireless/ath/ath10k/thermal.c create mode 100644 drivers/net/wireless/ath/ath10k/thermal.h -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
