From: Vladimir Shulman <qca_shulm...@qca.qualcomm.com> Due to HW limitation, inter-packet gap timeout max value is 13 usec. Update of current thresholds from 15 to 13 usec.
Signed-off-by: Vladimir Shulman <qca_shulm...@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkond...@qca.qualcomm.com> --- drivers/net/wireless/ath/wil6210/wil6210.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 2521ba1..3575b5d 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -78,8 +78,8 @@ static inline u32 wil_mtu2macbuf(u32 mtu) #define WIL_MAX_ETH_MTU (IEEE80211_MAX_DATA_LEN_DMG - 8) /* Max supported by wil6210 value for interrupt threshold is 5sec. */ #define WIL6210_ITR_TRSH_MAX (5000000) -#define WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT (15) /* usec */ -#define WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT (15) /* usec */ +#define WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT (13) /* usec */ +#define WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT (13) /* usec */ #define WIL6210_ITR_TX_MAX_BURST_DURATION_DEFAULT (500) /* usec */ #define WIL6210_ITR_RX_MAX_BURST_DURATION_DEFAULT (500) /* usec */ #define WIL6210_FW_RECOVERY_RETRIES (5) /* try to recover this many times */ -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
