When using hostapd and an rtl8192cu Wireless USB adaptor the beacon doesn't start sometimes. This was tested with the
kernel/git/davem/net-next.git repository and 3423eb92315865d76cb8d488513bfef6ab9251d0 This behaviour is apparently random. If the beacon starts OK then it continues. If a beacon isn't generated then it never starts. Repeating cycles of hostapd stop/start may or may not generate a beacon. There are no specific error messages displayed either on console or in syslog. I have repeated hostapd stop/start a number of consecutive times and received a beacon each time, however I have also done this a number of times and never generated a beacon. We have succesfully used the pvaret-rtl8192cu driver which is based on the vendor driver and used that in conjunction with the modified hostapd code that requires use of the rtl871xdrv driver interface and as far as we have seen it always generates a beacon. Platform is a custom designed Atmel-ARM CPU (AT91SAM9G25) with a D-Link DWA-121. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
