From: Hamad Kadmany <qca_hkadm...@qca.qualcomm.com>
Pass hidden SSID information to FW for proper operation.
In order to be able to scan/connect to the hidden SSID, SSID
setting is added when scan is requested from FW. SSID
scanning currently supports single SSID due to FW limitation.
Signed-off-by: Hamad Kadmany <qca_hkadm...@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkond...@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 46 +++++++++++++++++++++++++++--
drivers/net/wireless/ath/wil6210/wil6210.h | 3 +-
drivers/net/wireless/ath/wil6210/wmi.c | 4 ++-
drivers/net/wireless/ath/wil6210/wmi.h | 10 ++++++-
4 files changed, 57 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c
b/drivers/net/wireless/ath/wil6210/cfg80211.c
index dbfcdd1..c79cfe0 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -289,6 +289,26 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
}
wil_dbg_misc(wil, "Start scan_request 0x%p\n", request);
+ wil_dbg_misc(wil, "SSID count: %d", request->n_ssids);
+
+ for (i = 0; i < request->n_ssids; i++) {
+ wil_dbg_misc(wil, "SSID[%d]", i);
+ print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
+ request->ssids[i].ssid,
+ request->ssids[i].ssid_len);
+ }
+
+ if (request->n_ssids)
+ rc = wmi_set_ssid(wil, request->ssids[0].ssid_len,
+ request->ssids[0].ssid);
+ else
+ rc = wmi_set_ssid(wil, 0, NULL);
+
+ if (rc) {
+ wil_err(wil, "set SSID for scan request failed: %d\n", rc);
+ return rc;
+ }
+
wil->scan_request = request;
mod_timer(&wil->scan_timer, jiffies + WIL6210_SCAN_TO);
@@ -778,6 +798,7 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
const u8 *pr_ies = NULL;
size_t pr_ies_len = 0;
+ u8 hidden_ssid;
wil_dbg_misc(wil, "%s()\n", __func__);
@@ -790,6 +811,8 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
channel->center_freq, info->privacy ? "secure" : "open");
wil_dbg_misc(wil, "Privacy: %d auth_type %d\n",
info->privacy, info->auth_type);
+ wil_dbg_misc(wil, "Hidden SSID mode: %d\n",
+ info->hidden_ssid);
wil_dbg_misc(wil, "BI %d DTIM %d\n", info->beacon_interval,
info->dtim_period);
print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
@@ -835,10 +858,28 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
wil->privacy = info->privacy;
+ switch (info->hidden_ssid) {
+ case NL80211_HIDDEN_SSID_NOT_IN_USE:
+ hidden_ssid = WMI_HIDDEN_SSID_DISABLED;
+ break;
+
+ case NL80211_HIDDEN_SSID_ZERO_LEN:
+ hidden_ssid = WMI_HIDDEN_SSID_SEND_EMPTY;
+ break;
+
+ case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
+ hidden_ssid = WMI_HIDDEN_SSID_CLEAR;
+ break;
+
+ default:
+ rc = -EOPNOTSUPP;
+ goto out;
+ }
+
netif_carrier_on(ndev);
rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
- channel->hw_value);
+ channel->hw_value, hidden_ssid);
if (rc)
goto err_pcp_start;
@@ -1023,8 +1064,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
static void wil_wiphy_init(struct wiphy *wiphy)
{
- /* TODO: set real value */
- wiphy->max_scan_ssids = 10;
+ wiphy->max_scan_ssids = 1;
wiphy->max_scan_ie_len = WMI_MAX_IE_LEN;
wiphy->max_num_pmkids = 0 /* TODO: */;
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h
b/drivers/net/wireless/ath/wil6210/wil6210.h
index c39369f..78c7536 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -764,7 +764,8 @@ struct wireless_dev *wil_cfg80211_init(struct device *dev);
void wil_wdev_free(struct wil6210_priv *wil);
int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
-int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan);
+int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
+ u8 chan, u8 hidden_ssid);
int wmi_pcp_stop(struct wil6210_priv *wil);
void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
u16 reason_code, bool from_event);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c
b/drivers/net/wireless/ath/wil6210/wmi.c
index 26c707f..c759759 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -825,7 +825,8 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void
*addr)
return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
}
-int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan)
+int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
+ u8 chan, u8 hidden_ssid)
{
int rc;
@@ -835,6 +836,7 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8
wmi_nettype, u8 chan)
.disable_sec_offload = 1,
.channel = chan - 1,
.pcp_max_assoc_sta = max_assoc_sta,
+ .hidden_ssid = hidden_ssid,
};
struct {
struct wil6210_mbox_hdr_wmi wmi;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h
b/drivers/net/wireless/ath/wil6210/wmi.h
index cc04ab7..6e90e78 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -495,10 +495,18 @@ struct wmi_power_mgmt_cfg_cmd {
/*
* WMI_PCP_START_CMDID
*/
+
+enum wmi_hidden_ssid {
+ WMI_HIDDEN_SSID_DISABLED = 0,
+ WMI_HIDDEN_SSID_SEND_EMPTY = 1,
+ WMI_HIDDEN_SSID_CLEAR = 2,
+};
+
struct wmi_pcp_start_cmd {
__le16 bcon_interval;
u8 pcp_max_assoc_sta;
- u8 reserved0[9];
+ u8 hidden_ssid;
+ u8 reserved0[8];
u8 network_type;
u8 channel;
u8 disable_sec_offload;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
