On 12 June 2015 at 01:38, Ben Greear <gree...@candelatech.com> wrote: > On 06/11/2015 02:07 PM, Ben Greear wrote: >> In my ath10k CT firmware, I am disabling the beacon-miss offloading >> to save space and because it will not work with lots of virtual >> stations. >> >> But, it must be that I need some way to tell the stack that this >> feature is not enabled, because when suddenly kill my AP, then >> the ath10k station connected to it shows endless 'beacon loss' events >> in 'iw events' output, but it never actually loses connection. >> >> Stock firmware works fine, so probably I just need to disable >> some feature flag when registering the ath10k hardware >> when using CT firmware. >> >> With stock firmware, I see a quick dissassociation due to inactivity. >> >> I am having poor luck finding how a driver tells the stack >> it has beacon miss offload or not, so, does anyone know how >> this is controlled? > > I still am not sure why stock firmware works, but it appears > the reason mine is failing is that the ACK status for mgt frames > is always set to TRUE since the ath10k wmi-mgt-tx API is so > lame. So, mac80211 does a probe, ath10k lies and says it was > acked, and mac80211 then things all is well for another few > seconds.
mac80211 shouldn't do a Probe Req to an AP on beacon loss because ath10k advertises it supports tx-status report. Hence mac80211 should use NullFunc frames which shouldn't go through wmi-mgmt-tx but htt tx-frm. But then again: NullFunc status reporting via htt tx-frm was broken on 10.1 if memory serves right. I believe it was fixed in 10.2 or 10.2.4. This problem has been effectively obscured on stock 10.1 by the offloaded beacon miss. MichaĆ -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html