This is to prepare the driver for QCA99X0 chip support.
This commit adds hw_params, hw register table and hw_values
table for QCA99X0 chip. Please note this is only a partial patch adding
support for QCA99X0, so the device id is not yet added to pci device
table.
Signed-off-by: Vasanthakumar Thiagarajan <vthia...@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 18 ++++++++++++
drivers/net/wireless/ath/ath10k/hw.c | 44 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/hw.h | 18 ++++++++++++
drivers/net/wireless/ath/ath10k/pci.c | 5 ++++
drivers/net/wireless/ath/ath10k/targaddrs.h | 3 ++
5 files changed, 88 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index 2a17664..de85ec8 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -101,6 +101,20 @@ static const struct ath10k_hw_params
ath10k_hw_params_list[] = {
.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
},
},
+ {
+ .id = QCA99X0_HW_2_0_DEV_VERSION,
+ .name = "qca99x0 hw2.0",
+ .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
+ .uart_pin = 7,
+ .fw = {
+ .dir = QCA99X0_HW_2_0_FW_DIR,
+ .fw = QCA99X0_HW_2_0_FW_FILE,
+ .otp = QCA99X0_HW_2_0_OTP_FILE,
+ .board = QCA99X0_HW_2_0_BOARD_DATA_FILE,
+ .board_size = QCA99X0_BOARD_DATA_SZ,
+ .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
+ },
+ },
};
static void ath10k_send_suspend_complete(struct ath10k *ar)
@@ -1476,6 +1490,10 @@ struct ath10k *ath10k_core_create(size_t priv_size,
struct device *dev,
ar->regs = &qca6174_regs;
ar->hw_values = &qca6174_values;
break;
+ case ATH10K_HW_QCA99X0:
+ ar->regs = &qca99x0_regs;
+ ar->hw_values = &qca99x0_values;
+ break;
default:
ath10k_err(ar, "unsupported core hardware revision %d\n",
hw_rev);
diff --git a/drivers/net/wireless/ath/ath10k/hw.c
b/drivers/net/wireless/ath/ath10k/hw.c
index cb09867..e5fe33d9 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -72,6 +72,43 @@ const struct ath10k_hw_regs qca6174_regs = {
.pcie_intr_clr_address = 0x00000014,
};
+const struct ath10k_hw_regs qca99x0_regs = {
+ .rtc_state_cold_reset_mask = 0x00000400,
+ .rtc_soc_base_address = 0x00080000,
+ .rtc_wmac_base_address = 0x00000000,
+ .soc_core_base_address = 0x00082000,
+ .ce_wrapper_base_address = 0x0004d000,
+ .ce0_base_address = 0x0004a000,
+ .ce1_base_address = 0x0004a400,
+ .ce2_base_address = 0x0004a800,
+ .ce3_base_address = 0x0004ac00,
+ .ce4_base_address = 0x0004b000,
+ .ce5_base_address = 0x0004b400,
+ .ce6_base_address = 0x0004b800,
+ .ce7_base_address = 0x0004bc00,
+ /* Note: qca99x0 supports upto 12 Copy Engines. Other than address of
+ * CE0 and CE1 no other copy engine is directly referred in the code.
+ * It is not really neccessary to assign address for newly supported
+ * CEs in this address table.
+ * Copy Engine Address
+ * CE8 0x0004c000
+ * CE9 0x0004c400
+ * CE10 0x0004c800
+ * CE11 0x0004cc00
+ */
+ .soc_reset_control_si0_rst_mask = 0x00000001,
+ .soc_reset_control_ce_rst_mask = 0x00000100,
+ .soc_chip_id_address = 0x000000ec,
+ .scratch_3_address = 0x00040050,
+ .fw_indicator_address = 0x00040050,
+ .pcie_local_base_address = 0x00000000,
+ .ce_wrap_intr_sum_host_msi_lsb = 0x0000000c,
+ .ce_wrap_intr_sum_host_msi_mask = 0x00fff000,
+ .pcie_intr_fw_mask = 0x00100000,
+ .pcie_intr_ce_mask_all = 0x000fff00,
+ .pcie_intr_clr_address = 0x00000010,
+};
+
const struct ath10k_hw_values qca988x_values = {
.rtc_state_val_on = 3,
.ce_count = 8,
@@ -86,6 +123,13 @@ const struct ath10k_hw_values qca6174_values = {
.num_target_ce_config_wlan = 7,
};
+const struct ath10k_hw_values qca99x0_values = {
+ .rtc_state_val_on = 5,
+ .ce_count = 12,
+ .msi_assign_ce_max = 12,
+ .num_target_ce_config_wlan = 10,
+};
+
void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev)
{
diff --git a/drivers/net/wireless/ath/ath10k/hw.h
b/drivers/net/wireless/ath/ath10k/hw.h
index 5d04317..76caeab 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -72,6 +72,18 @@ enum qca6174_chip_id_rev {
#define QCA6174_HW_3_0_BOARD_DATA_FILE "board.bin"
#define QCA6174_HW_3_0_PATCH_LOAD_ADDR 0x1234
+/* QCA99X0 1.0 definitions (unsupported) */
+#define QCA99X0_HW_1_0_CHIP_ID_REV 0x0
+
+/* QCA99X0 2.0 definitions */
+#define QCA99X0_HW_2_0_DEV_VERSION 0x01000000
+#define QCA99X0_HW_2_0_CHIP_ID_REV 0x1
+#define QCA99X0_HW_2_0_FW_DIR ATH10K_FW_DIR "/QCA99X0/hw2.0"
+#define QCA99X0_HW_2_0_FW_FILE "firmware.bin"
+#define QCA99X0_HW_2_0_OTP_FILE "otp.bin"
+#define QCA99X0_HW_2_0_BOARD_DATA_FILE "board.bin"
+#define QCA99X0_HW_2_0_PATCH_LOAD_ADDR 0x1234
+
#define ATH10K_FW_API2_FILE "firmware-2.bin"
#define ATH10K_FW_API3_FILE "firmware-3.bin"
@@ -144,6 +156,7 @@ enum ath10k_fw_htt_op_version {
enum ath10k_hw_rev {
ATH10K_HW_QCA988X,
ATH10K_HW_QCA6174,
+ ATH10K_HW_QCA99X0,
};
struct ath10k_hw_regs {
@@ -175,6 +188,7 @@ struct ath10k_hw_regs {
extern const struct ath10k_hw_regs qca988x_regs;
extern const struct ath10k_hw_regs qca6174_regs;
+extern const struct ath10k_hw_regs qca99x0_regs;
struct ath10k_hw_values {
u32 rtc_state_val_on;
@@ -185,12 +199,14 @@ struct ath10k_hw_values {
extern const struct ath10k_hw_values qca988x_values;
extern const struct ath10k_hw_values qca6174_values;
+extern const struct ath10k_hw_values qca99x0_values;
void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev);
#define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
#define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
+#define QCA_REV_99X0(ar) ((ar)->hw_rev == ATH10K_HW_QCA99X0)
/* Known pecularities:
* - current FW doesn't support raw rx mode (last tested v599)
@@ -485,6 +501,8 @@ enum ath10k_hw_rate_cck {
#define DRAM_BASE_ADDRESS 0x00400000
+#define PCIE_BAR_REG_ADDRESS 0x40030
+
#define MISSING 0
#define SYSTEM_SLEEP_OFFSET SOC_SYSTEM_SLEEP_OFFSET
diff --git a/drivers/net/wireless/ath/ath10k/pci.c
b/drivers/net/wireless/ath/ath10k/pci.c
index ea656e0..190f7f3 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -59,6 +59,7 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default:
0)");
#define QCA988X_2_0_DEVICE_ID (0x003c)
#define QCA6174_2_1_DEVICE_ID (0x003e)
+#define QCA99X0_2_0_DEVICE_ID (0x0040)
static const struct pci_device_id ath10k_pci_id_table[] = {
{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
@@ -1687,6 +1688,7 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)
switch (ar_pci->pdev->device) {
case QCA988X_2_0_DEVICE_ID:
+ case QCA99X0_2_0_DEVICE_ID:
return 1;
case QCA6174_2_1_DEVICE_ID:
switch (MS(ar->chip_id, SOC_CHIP_ID_REV)) {
@@ -2745,6 +2747,9 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
case QCA6174_2_1_DEVICE_ID:
hw_rev = ATH10K_HW_QCA6174;
break;
+ case QCA99X0_2_0_DEVICE_ID:
+ hw_rev = ATH10K_HW_QCA99X0;
+ break;
default:
WARN_ON(1);
return -ENOTSUPP;
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h
b/drivers/net/wireless/ath/ath10k/targaddrs.h
index a417aae..768bef6 100644
--- a/drivers/net/wireless/ath/ath10k/targaddrs.h
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -450,4 +450,7 @@ Fw Mode/SubMode Mask
#define QCA6174_BOARD_DATA_SZ 8192
#define QCA6174_BOARD_EXT_DATA_SZ 0
+#define QCA99X0_BOARD_DATA_SZ 12288
+#define QCA99X0_BOARD_EXT_DATA_SZ 0
+
#endif /* __TARGADDRS_H__ */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
