From: Oleksij Rempel <external.oleksij.rem...@de.bosch.com>

current code will handle -ETIMEDOUT as success which is probalbly wrong.

According to this comment I assume it is safe to handle -ETIMEDOUT as false:
drivers/net/wireless/ath/ath9k/calib.c
290         /*
291          * We timed out waiting for the noisefloor to load, probably due to 
an
292          * in-progress rx. Simply return here and allow the load plenty of 
time
293          * to complete before the next calibration interval.  We need to 
avoid
294          * trying to load -50 (which happens below) while the previous load 
is
295          * still in progress as this can cause rx deafness. Instead by 
returning
296          * here, the baseband nf cal will just be capped by our present
297          * noisefloor until the next calibration timer.
298          */

Since no other error wariants are present, this patch is checking only
for (ret <= 0).

Reported-by: Dan Carpenter <dan.carpen...@oracle.com>
Signed-off-by: Oleksij Rempel <external.oleksij.rem...@de.bosch.com>
---
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c 
b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index dab1323..172a9ff 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -794,8 +794,11 @@ void ath9k_htc_ani_work(struct work_struct *work)
                common->ani.longcal_timer = timestamp;
        }
 
-       /* Short calibration applies only while caldone is false */
-       if (!common->ani.caldone) {
+       /*
+        * Short calibration applies only while caldone
+        * is false or -ETIMEDOUT
+        */
+       if (common->ani.caldone <= 0) {
                if ((timestamp - common->ani.shortcal_timer) >=
                    short_cal_interval) {
                        shortcal = true;
@@ -844,7 +847,11 @@ set_timer:
        */
        cal_interval = ATH_LONG_CALINTERVAL;
        cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL);
-       if (!common->ani.caldone)
+       /*
+        * Short calibration applies only while caldone
+        * is false or -ETIMEDOUT
+        */
+       if (common->ani.caldone <= 0)
                cal_interval = min(cal_interval, (u32)short_cal_interval);
 
        ieee80211_queue_delayed_work(common->hw, &priv->ani_work,
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to