From: Miaoqing Pan <miaoq...@qca.qualcomm.com>
One stuck issue was found on AP152, the root cause is using wrong
calibration initial function.
Signed-off-by: Miaoqing Pan <miaoq...@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 174442b..3880df7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1310,7 +1310,8 @@ static void ar9003_hw_do_pcoem_manual_peak_cal(struct
ath_hw *ah,
struct ath9k_hw_cal_data *caldata = ah->caldata;
int i;
- if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah))
+ if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah) &&
+ !AR_SREV_9561(ah))
return;
if ((ah->caps.hw_caps & ATH9K_HW_CAP_RTT) && !run_rtt_cal)
@@ -1707,7 +1708,8 @@ void ar9003_hw_attach_calib_ops(struct ath_hw *ah)
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
struct ath_hw_ops *ops = ath9k_hw_ops(ah);
- if (AR_SREV_9485(ah) || AR_SREV_9462(ah) || AR_SREV_9565(ah))
+ if (AR_SREV_9485(ah) || AR_SREV_9462(ah) || AR_SREV_9565(ah) ||
+ AR_SREV_9561(ah))
priv_ops->init_cal = ar9003_hw_init_cal_pcoem;
else
priv_ops->init_cal = ar9003_hw_init_cal_soc;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
