rtl8723au driver treats REG_9346CR register as either 8- or 16-bit wide,
while rtl8192cu driver treats it as 8-bit wide, and so does rtl8188eu
driver. Use the lowest common denominator strategy.
Signed-off-by: Jakub Sitnicki <jsitni...@gmail.com>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 11fcfda..5f90261 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -1928,10 +1928,10 @@ static int rtl8xxxu_read_efuse(struct rtl8xxxu_priv
*priv)
u16 val16, efuse_addr, offset;
u32 val32;
- val16 = rtl8xxxu_read16(priv, REG_9346CR);
- if (val16 & EEPROM_ENABLE)
+ val8 = rtl8xxxu_read8(priv, REG_9346CR);
+ if (val8 & EEPROM_ENABLE)
priv->has_eeprom = 1;
- if (val16 & EEPROM_BOOT)
+ if (val8 & EEPROM_BOOT)
priv->boot_eeprom = 1;
val32 = rtl8xxxu_read32(priv, REG_EFUSE_TEST);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
