Adjust driver behavior during FW boot. Proper sequence of
events after reset and FW download, is as following:
- FW prepares mailbox structure and reports IRQ "FW_READY"
- driver caches mailbox registers, marks mailbox readiness
- FW sends WMI_FW_READY event, ignore it
- FW sends WMI_READY event with some data
- driver stores relevant data marks FW is operational
Signed-off-by: Vladimir Kondratiev <qca_vkond...@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 6 +++---
drivers/net/wireless/ath/wil6210/wil6210.h | 4 ++--
drivers/net/wireless/ath/wil6210/wmi.c | 10 ++--------
3 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c
b/drivers/net/wireless/ath/wil6210/interrupt.c
index 06fc46f..50c136e 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -236,7 +236,7 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
isr &= ~(BIT_DMA_EP_RX_ICR_RX_DONE |
BIT_DMA_EP_RX_ICR_RX_HTRSH);
- if (likely(test_bit(wil_status_reset_done, wil->status))) {
+ if (likely(test_bit(wil_status_fwready, wil->status))) {
if (likely(test_bit(wil_status_napi_en, wil->status))) {
wil_dbg_txrx(wil, "NAPI(Rx) schedule\n");
need_unmask = false;
@@ -286,7 +286,7 @@ static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
/* clear also all VRING interrupts */
isr &= ~(BIT(25) - 1UL);
- if (likely(test_bit(wil_status_reset_done, wil->status))) {
+ if (likely(test_bit(wil_status_fwready, wil->status))) {
wil_dbg_txrx(wil, "NAPI(Tx) schedule\n");
need_unmask = false;
napi_schedule(&wil->napi_tx);
@@ -364,7 +364,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
if (isr & ISR_MISC_FW_READY) {
wil_dbg_irq(wil, "IRQ: FW ready\n");
wil_cache_mbox_regs(wil);
- set_bit(wil_status_reset_done, wil->status);
+ set_bit(wil_status_mbox_ready, wil->status);
/**
* Actual FW ready indicated by the
* WMI_FW_READY_EVENTID
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h
b/drivers/net/wireless/ath/wil6210/wil6210.h
index f619bf2..ade5f3b8 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -402,11 +402,11 @@ struct vring_tx_data {
};
enum { /* for wil6210_priv.status */
- wil_status_fwready = 0,
+ wil_status_fwready = 0, /* FW operational */
wil_status_fwconnecting,
wil_status_fwconnected,
wil_status_dontscan,
- wil_status_reset_done,
+ wil_status_mbox_ready, /* MBOX structures ready */
wil_status_irqen, /* FIXME: interrupts enabled - for debug */
wil_status_napi_en, /* NAPI enabled protected by wil->mutex */
wil_status_resetting, /* reset in progress */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c
b/drivers/net/wireless/ath/wil6210/wmi.c
index 361f3d8..6ed26ba 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -293,12 +293,6 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int
id, void *d, int len)
/* ignore MAC address, we already have it from the boot loader */
snprintf(wdev->wiphy->fw_version, sizeof(wdev->wiphy->fw_version),
"%d", wil->fw_version);
-}
-
-static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
- int len)
-{
- wil_dbg_wmi(wil, "WMI: got FW ready event\n");
wil_set_recovery_state(wil, fw_recovery_idle);
set_bit(wil_status_fwready, wil->status);
@@ -699,7 +693,7 @@ static const struct {
void *data, int data_len);
} wmi_evt_handlers[] = {
{WMI_READY_EVENTID, wmi_evt_ready},
- {WMI_FW_READY_EVENTID, wmi_evt_fw_ready},
+ {WMI_FW_READY_EVENTID, wmi_evt_ignore},
{WMI_RX_MGMT_PACKET_EVENTID, wmi_evt_rx_mgmt},
{WMI_TX_MGMT_PACKET_EVENTID, wmi_evt_tx_mgmt},
{WMI_SCAN_COMPLETE_EVENTID, wmi_evt_scan_complete},
@@ -730,7 +724,7 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
ulong flags;
unsigned n;
- if (!test_bit(wil_status_reset_done, wil->status)) {
+ if (!test_bit(wil_status_mbox_ready, wil->status)) {
wil_err(wil, "Reset in progress. Cannot handle WMI event\n");
return;
}
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
