This only happens when you use STA + WDS, or is .1q broken
for you in other cases as well?
Thanks,
Ben
On 12/08/2015 06:29 AM, Cedric VONCKEN wrote:
I'm testing to transmit frame with 802.1q tag (VLAN).
My client is set in STA + WDS and the netdev is bridged with
eth0.
I have a computer with vlan configuration set connected to the
STA eth0.
If I try to transmit frames with 802.1q tag, the frames are not
sent.
I checked with wireless sniffer, and I don't see the frame with
VLAN tag (the frames without VLAN tag are sent).
I tested with firmware 10.2.4.70.14-2 from kale github,
10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt,
and in all cases I have the same issue.
Thanks for your help.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben Greear <gree...@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
