From: Jes Sorensen <jes.soren...@redhat.com>
Set PHY lock after running the RF init sequence on 8723bu.
Signed-off-by: Jes Sorensen <jes.soren...@redhat.com>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 566eeb5..566159e 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -6093,6 +6093,13 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
case 0x8723b:
rftable = rtl8723bu_radioa_1t_init_table;
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
+ /*
+ * PHY LCK
+ */
+ rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0);
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01);
+ msleep(200);
+ rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0);
break;
case 0x8188c:
if (priv->hi_pa)
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
