From: Jes Sorensen <jes.soren...@redhat.com>
All currently supported gen1 parts use the same disable_rf() routine,
so rename the function to reflect that.
Signed-off-by: Jes Sorensen <jes.soren...@redhat.com>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 7a28b78..4aab4f5 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -2120,7 +2120,7 @@ static void rtl8723a_enable_rf(struct rtl8xxxu_priv *priv)
rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
}
-static void rtl8723a_disable_rf(struct rtl8xxxu_priv *priv)
+static void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv)
{
u8 sps0;
u32 val32;
@@ -9882,7 +9882,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
.config_channel = rtl8723au_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
.enable_rf = rtl8723a_enable_rf,
- .disable_rf = rtl8723a_disable_rf,
+ .disable_rf = rtl8xxxu_gen1_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8723a_set_tx_power,
.update_rate_mask = rtl8723au_update_rate_mask,
@@ -9954,7 +9954,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
.config_channel = rtl8723au_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc16,
.enable_rf = rtl8723a_enable_rf,
- .disable_rf = rtl8723a_disable_rf,
+ .disable_rf = rtl8xxxu_gen1_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
.set_tx_power = rtl8723a_set_tx_power,
.update_rate_mask = rtl8723au_update_rate_mask,
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
