This patch fixes the following checkpatch.pl issues -
- Please don't use multiple blank lines
- Blank lines aren't necessary before a close brace
- Missing a blank line after declarations
Reviewed-by: Julian Calaby <julian.cal...@gmail.com>
Signed-off-by: Kirtika Ruchandani <kirtika.ruchand...@gmail.com>
---
net/wireless/nl80211.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 50a0de0..cd422bd 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -167,6 +167,7 @@ __cfg80211_rdev_from_attrs(struct net *netns, struct nlattr
**attrs)
if (attrs[NL80211_ATTR_IFINDEX]) {
int ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
+
netdev = __dev_get_by_index(netns, ifindex);
if (netdev) {
if (netdev->ieee80211_ptr)
@@ -730,6 +731,7 @@ static int nl80211_parse_key_new(struct nlattr *key, struct
key_parse *k)
if (tb[NL80211_KEY_DEFAULT_TYPES]) {
struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES];
+
err = nla_parse_nested(kdt, NUM_NL80211_KEY_DEFAULT_TYPES - 1,
tb[NL80211_KEY_DEFAULT_TYPES],
nl80211_key_default_policy);
@@ -1381,6 +1383,7 @@ static int nl80211_send_wiphy(struct
cfg80211_registered_device *rdev,
rdev->ops->get_antenna) {
u32 tx_ant = 0, rx_ant = 0;
int res;
+
res = rdev_get_antenna(rdev, &tx_ant, &rx_ant);
if (!res) {
if (nla_put_u32(msg,
@@ -2111,7 +2114,6 @@ static int nl80211_set_wds_peer(struct sk_buff *skb,
struct genl_info *info)
return rdev_set_wds_peer(rdev, dev, bssid);
}
-
static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
@@ -2244,6 +2246,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct
genl_info *info)
if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
u32 tx_ant, rx_ant;
+
if ((!rdev->wiphy.available_antennas_tx &&
!rdev->wiphy.available_antennas_rx) ||
!rdev->ops->set_antenna)
@@ -2910,6 +2913,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct
genl_info *info)
pairwise = !!mac_addr;
if (info->attrs[NL80211_ATTR_KEY_TYPE]) {
u32 kt = nla_get_u32(info->attrs[NL80211_ATTR_KEY_TYPE]);
+
if (kt >= NUM_NL80211_KEYTYPES)
return -EINVAL;
if (kt != NL80211_KEYTYPE_GROUP &&
@@ -3949,7 +3953,6 @@ static int nl80211_dump_station(struct sk_buff *skb,
sta_idx++;
}
-
out:
cb->args[2] = sta_idx;
err = skb->len;
@@ -4742,7 +4745,6 @@ static int nl80211_dump_mpath(struct sk_buff *skb,
path_idx++;
}
-
out:
cb->args[2] = path_idx;
err = skb->len;
@@ -5032,7 +5034,6 @@ static int nl80211_req_set_reg(struct sk_buff *skb,
struct genl_info *info)
enum nl80211_user_reg_hint_type user_reg_hint_type;
u32 owner_nlportid;
-
/* You should only get this when cfg80211 hasn't yet initialized
* completely when built-in to the kernel right between the time
* window between nl80211_init() and regulatory_init(), if that is
@@ -5240,7 +5241,6 @@ do {
\
} \
} while (0)
-
if (!info->attrs[NL80211_ATTR_MESH_CONFIG])
return -EINVAL;
if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX,
@@ -5388,7 +5388,6 @@ static int nl80211_parse_mesh_setup(struct genl_info
*info,
IEEE80211_PATH_METRIC_VENDOR :
IEEE80211_PATH_METRIC_AIRTIME;
-
if (tb[NL80211_MESH_SETUP_IE]) {
struct nlattr *ieattr =
tb[NL80211_MESH_SETUP_IE];
@@ -6009,6 +6008,7 @@ static int nl80211_trigger_scan(struct sk_buff *skb,
struct genl_info *info)
/* all channels */
for (band = 0; band < NUM_NL80211_BANDS; band++) {
int j;
+
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
@@ -6412,6 +6412,7 @@ nl80211_parse_sched_scan(struct wiphy *wiphy, struct
wireless_dev *wdev,
/* all channels */
for (band = 0; band < NUM_NL80211_BANDS; band++) {
int j;
+
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
@@ -7174,6 +7175,7 @@ static int nl80211_authenticate(struct sk_buff *skb,
struct genl_info *info)
if (key.idx >= 0) {
int i;
bool ok = false;
+
for (i = 0; i < rdev->wiphy.n_cipher_suites; i++) {
if (key.p.cipher == rdev->wiphy.cipher_suites[i]) {
ok = true;
@@ -7251,6 +7253,7 @@ static int nl80211_crypto_settings(struct
cfg80211_registered_device *rdev,
if (info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]) {
u16 proto;
+
proto = nla_get_u16(
info->attrs[NL80211_ATTR_CONTROL_PORT_ETHERTYPE]);
settings->control_port_ethertype = cpu_to_be16(proto);
@@ -8402,6 +8405,7 @@ static u32 rateset_to_mask(struct
ieee80211_supported_band *sband,
for (i = 0; i < rates_len; i++) {
int rate = (rates[i] & 0x7f) * 5;
int ridx;
+
for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
struct ieee80211_rate *srate =
&sband->bitrates[ridx];
@@ -8708,7 +8712,6 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct
genl_info *info)
if (params.wait < NL80211_MIN_REMAIN_ON_CHANNEL_TIME ||
params.wait > rdev->wiphy.max_remain_on_channel_duration)
return -EINVAL;
-
}
params.offchan = info->attrs[NL80211_ATTR_OFFCHANNEL_TX_OK];
@@ -10555,7 +10558,6 @@ int cfg80211_vendor_cmd_reply(struct sk_buff *skb)
}
EXPORT_SYMBOL_GPL(cfg80211_vendor_cmd_reply);
-
static int nl80211_set_qos_map(struct sk_buff *skb,
struct genl_info *info)
{
@@ -12089,7 +12091,6 @@ void nl80211_send_connect_result(struct
cfg80211_registered_device *rdev,
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
-
}
void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
@@ -12128,7 +12129,6 @@ void nl80211_send_roamed(struct
cfg80211_registered_device *rdev,
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
-
}
void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
@@ -12166,7 +12166,6 @@ void nl80211_send_disconnected(struct
cfg80211_registered_device *rdev,
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
-
}
void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
@@ -13506,7 +13505,6 @@ void cfg80211_crit_proto_stopped(struct wireless_dev
*wdev, gfp_t gfp)
if (hdr)
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
-
}
EXPORT_SYMBOL(cfg80211_crit_proto_stopped);
--
2.8.0.rc3.226.g39d4020
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
