On 06/20/2016 10:18 PM, Mohammed Shafi Shajakhan wrote:
Hi Ben,
thanks for reporting ...
On Mon, Jun 20, 2016 at 04:06:52PM -0700, Ben Greear wrote:
I'm working on bringing up my hacked up version of 4.7 ath10k and 10.4
firmware, and I think
I may have found a regression.
[shafi] let me know what is the issue.. some steps to recreate the issue.
ethtool -S wlan0
or similar should reproduce it.
You would see stats timeout messages in dmesg, and with a bit more debugging,
you notice that the driver is basically busy-spinning trying to get stats over
WMI and/or it is giving errors because skb pull fails because there actually is
not extd stats struct.
My 10.4.3-ish firmware source has a bunch of:
if (stats_id == WMI_REQUEST_PEER_STAT)
logic in it. In other words, it is not using that id as a bitfield.
[shafi] will check this.
I fixed my firmware to treat it as a bitfield, and to specifically un-set the
EXTD stats
bit, and now it works with my 4.7. Firmware fix should be backwards compatible.
Now, I can fix the firmware, but I am guessing that at least some stock
10.4 firmware has this same issue, and of course any older firmware
that does not have this change will still be broken.
So, do you want to back out this patch below, at least the part where it sends
in 0x9 as the stats_id?
[shafi] request if you can check this please, there was some misunderstanding
in the design when this feature got enabled in 10.4, we fixed it in
https://patchwork.kernel.org/patch/9149357/
That might have fixed it, but it is not in 4.7, so I didn't have it
in my tree when testing yesterday.
Thanks,
Ben
--
Ben Greear <gree...@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
