[PATCH] ath10k: add cc_wraparound type for QCA9888 and QCA9884

[akolli]

From: Anilkumar Kolli <ako...@qti.qualcomm.com>

During offchannel scan, iw survey dump shows wrong values.
Fix this by assigning cycle counter wranarround type for
QCA9888 and QCA9884, they share same config with QCA4019.

Signed-off-by: Anilkumar Kolli <ako...@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c 
b/drivers/net/wireless/ath/ath10k/core.c
index 3a8984ba9f74..93168d9f8902 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -191,6 +191,7 @@ static const struct ath10k_hw_params 
ath10k_hw_params_list[] = {
                .name = "qca9984/qca9994 hw1.0",
                .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
                .uart_pin = 7,
+               .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
                .otp_exe_param = 0x00000700,
                .continuous_frag_desc = true,
                .cck_rate_map_rev2 = true,
@@ -215,6 +216,7 @@ static const struct ath10k_hw_params 
ath10k_hw_params_list[] = {
                .name = "qca9888 hw2.0",
                .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
                .uart_pin = 7,
+               .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
                .otp_exe_param = 0x00000700,
                .continuous_frag_desc = true,
                .channel_counters_freq_hz = 150000,
-- 
1.7.9.5