The beta-18 release on my web page has the fix and should work fine.
Probably soon I will promote the beta-18 to final release
status. Any help in testing and verifying the beta works well
is welcome.
Thanks,
Ben
On 11/15/2016 06:37 AM, voncken wrote:
Hi Ben,
Do you plan to release a candelatech firmware with this fix?
Regards.
Cedric Voncken.
-----Message d'origine-----
De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless-
ow...@vger.kernel.org] De la part de Ben Greear
Envoyé : samedi 5 novembre 2016 15:35
À : Sebastian Gottschall; yu-chieh kung; Bruno Antunes
Cc : Mauro Mozzarelli; linux-wireless@vger.kernel.org; OpenWrt
Development List; ath...@lists.infradead.org
Objet : Re: [OpenWrt-Devel] ATH10K VLAN firmware issue
Looks to me like 10.4 defaults to the right value, but possibly there
are other issues with it. I tested my CT 10.4 and it worked OK with
vlans for me.
Thanks,
Ben
On 11/05/2016 01:05 AM, Sebastian Gottschall wrote:
would be good if qca can fix this bug finally in all available
firmwares. its a very annoying issue since a long time
Sebastian
Am 04.11.2016 um 23:23 schrieb Ben Greear:
The bug appears that vlan-tx-stripping is unconditionally enabled in
at least my firmware. I have re-compiled w/out that flag set, and
it
appears to work for me.
Please download this firmware, rename it firmware-2.bin, make sure
you remove/rename any firmware-5.bin (etc) so mine will load, and
see if that fixes your problem.
Please note that it is very likely you will have to use same MAC
address for the VLAN devices that the underlying station uses in
order for this to work.
https://www.candelatech.com/downloads/tmp/firmware-2-full-
community.b
in
Thanks,
Ben
On 11/04/2016 02:50 PM, Ben Greear wrote:
I can reproduce this in my CT firmware. I'll see if I can fix it,
but for stock firmware, it might be that changing the driver to use
Ethernet packet type of native-wifi would make .1q vlans work.
Thanks,
Ben
On 11/04/2016 10:28 AM, yu-chieh kung wrote:
I met the same problem before,
if i modify the 1q header to other value (0xaa00) before go into
firmware.
I can capture the packet in the air I think the vlan packet is
dropped in firmware.
2016-11-04 22:41 GMT+08:00 Bruno Antunes <baantu...@gmail.com>:
On 4 November 2016 at 14:18, Mauro Mozzarelli
<open...@ezplanet.net> wrote:
Since the capability is implemented in software you might be
testing the limit of your router's CPU i/o speed.
By loading the module in rawmode?
The AP is an APU and Sta is an APU2.
On 04/11/16 14:13, Bruno Antunes wrote:
Hi all,
Old thread but I think the issue is still present.
I'm running a setup with VLANs with WDS and ath10k cards.
To make it work both cards must be loaded in rawmode, AP and
Sta, and with no security.
I'm using a OpenWrt trunk r49941 and the most recent firmware,
10.2.4.70.58, from Kalle ath10k firmware tree.
Although it works the throughput is very bad.
Are there any alternatives to improve the throughput.
Best Regards,
Bruno
On 9 December 2015 at 17:24, voncken <cedric.vonc...@acksys.fr>
wrote:
-----Message d'origine-----
De : Ben Greear [mailto:gree...@candelatech.com] Envoyé :
mercredi 9 décembre 2015 16:34 À : Cedric VONCKEN;
ath...@lists.infradead.org; linux-wireless Objet : Re: ATH10K
VLAN firmware issue
This only happens when you use STA + WDS, or is .1q broken
for you in other cases as well?
No, this issue occurs in all modes (STA, STA + WDS, AP).
Thanks
Cedric.
Thanks,
Ben
On 12/08/2015 06:29 AM, Cedric VONCKEN wrote:
I'm testing to transmit frame with 802.1q tag (VLAN).
My client is set in STA + WDS and the netdev is bridged
with eth0.
I have a computer with vlan configuration set connected
to the STA eth0.
If I try to transmit frames with 802.1q tag, the frames
are not
sent.
I checked with wireless sniffer, and I don't see the
frame with VLAN tag (the frames without VLAN tag are sent).
I tested with firmware 10.2.4.70.14-2 from kale github,
10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2
from openwrt, and in all cases I have the same issue.
Thanks for your help.
--
To unsubscribe from this list: send the line "unsubscribe
linux-wireless" in the body of a message to
majord...@vger.kernel.org More majordomo info at
http://vger.kernel.org/majordomo-info.html
--
Ben Greear <gree...@candelatech.com> Candela Technologies Inc
http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe
linux-wireless"
in
the body of a message to majord...@vger.kernel.org More
majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
openwrt-devel mailing list
openwrt-de...@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-
devel
_______________________________________________
openwrt-devel mailing list
openwrt-de...@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
ath10k mailing list
ath...@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
--
Ben Greear <gree...@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
--
Ben Greear <gree...@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
