On 28-12-16 16:59, Rafał Miłecki wrote:
> From: Rafał Miłecki <ra...@milecki.pl>
>
> This new file should be used for properties handled at higher level and
> so usable with all drivers.
>
> Signed-off-by: Rafał Miłecki <ra...@milecki.pl>
> ---
> .../devicetree/bindings/net/wireless/ieee80211.txt | 16
> ++++++++++++++++
> 1 file changed, 16 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/net/wireless/ieee80211.txt
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
> b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
> new file mode 100644
> index 0000000..c762769
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
> @@ -0,0 +1,16 @@
> +Common IEEE 802.11 properties
> +
> +This provides documentation of common properties that are handled by a proper
> +net layer and don't require extra driver code.
Please do not make any assumptions on how DT properties are handled nor
by what. Just state that these properties apply to all wireless devices
and are applicable to device specific bindings.
> +Optional properties:
> + - ieee80211-min-center-freq : minimal supported frequency in KHz
> + - ieee80211-max-center-freq : maximal supported frequency in KHz
> +
> +Example:
> +
> +pcie@0,0 {
> + reg = <0x0000 0 0 0 0>;
> + ieee80211-min-center-freq = <2437000>;
> + ieee80211-max-center-freq = <2457000>;
> +};
Is this the proper level to define it. I was expecting a child node of
the pci(e) controller. Maybe I am misreading the example.
Regards,
