The example DTS code for the trf7970a sets the GPIOs for the EN and EN2 pins to active low when they are really active high so correct the error.
Acked-by: Rob Herring <[email protected]> Signed-off-by: Mark Greer <[email protected]> --- Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 57cb52c94783..a24a93a4b010 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -36,8 +36,8 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): spi-max-frequency = <2000000>; interrupt-parent = <&gpio2>; interrupts = <14 0>; - ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, - <&gpio2 5 GPIO_ACTIVE_LOW>; + ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>, + <&gpio2 5 GPIO_ACTIVE_HIGH>; vin-supply = <&ldo3_reg>; vdd-io-supply = <&ldo2_reg>; autosuspend-delay = <30000>; -- 2.12.0
