Droid 4 has WL 1285C connected to the OMAP's UART4 port, which is
used for Bluetooth and most likely can also be used for controlling
the FM radio and GPS receivers.
Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.co.uk>
---
arch/arm/boot/dts/omap4-droid4-xt894.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts
b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index c09b51d6ccf7..bd7f1cc55371 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -453,6 +453,15 @@
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
>;
};
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /*
uart4_rx */
+ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /*
uart4_tx */
+ OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /*
uart4_cts */
+ OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /*
uart4_rts */
+ >;
+ };
};
&omap4_pmx_wkup {
@@ -469,6 +478,17 @@
&omap4_pmx_core 0x17c>;
};
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+
+ bluetooth {
+ compatible = "ti,wl1285-st";
+ enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
+ max-speed = <3686400>;
+ };
+};
+
&usbhsehci {
phys = <&hsusb1_phy>;
};
--
2.11.0
