From: Yan-Hsuan Chuang <yhchu...@realtek.com> Before firmware is ready, set GNT_BT to high to let bt transmit.
Routine ex_btc8821a2ant_pre_load_firmware() restored. Signed-off-by: Yan-Hsuan Chuang <yhchu...@realtek.com> Signed-off-by: Larry Finger <larry.fin...@lwfinger.net> Cc: Pkshih <pks...@realtek.com> Cc: Birming Chiu <birm...@realtek.com> Cc: Shaofu <sha...@realtek.com> Cc: Steven Ting <stevent...@realtek.com> --- v2 - resubmit after removal of BT_AUTO_REPORT_XXXX symbols. --- .../realtek/rtlwifi/btcoexist/halbtc8821a2ant.c | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c index 162d40ddf06d..9aa140a46d46 100644 --- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c +++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c @@ -3609,6 +3609,43 @@ void ex_btc8821a2ant_init_hwconfig(struct btc_coexist *btcoexist) btcoexist->btc_write_1byte_bitmask(btcoexist, 0x40, 0x20, 0x1); } +void ex_btc8821a2ant_pre_load_firmware(struct btc_coexist *btcoexist) +{ + struct btc_board_info *board_info = &btcoexist->board_info; + u8 u8tmp = 0x4; /* Set BIT2 by default since it's 2ant case */ + + /** + * S0 or S1 setting and Local register setting(By the setting fw can get + * ant number, S0/S1, ... info) + * + * Local setting bit define + * BIT0: "0" for no antenna inverse; "1" for antenna inverse + * BIT1: "0" for internal switch; "1" for external switch + * BIT2: "0" for one antenna; "1" for two antenna + * NOTE: here default all internal switch and 1-antenna ==> BIT1=0 and + * BIT2=0 + */ + if (btcoexist->chip_interface == BTC_INTF_USB) { + /* fixed at S0 for USB interface */ + u8tmp |= 0x1; /* antenna inverse */ + btcoexist->btc_write_local_reg_1byte(btcoexist, 0xfe08, u8tmp); + } else { + /* for PCIE and SDIO interface, we check efuse 0xc3[6] */ + if (board_info->single_ant_path == 0) { + } else if (board_info->single_ant_path == 1) { + /* set to S0 */ + u8tmp |= 0x1; /* antenna inverse */ + } + + if (btcoexist->chip_interface == BTC_INTF_PCI) + btcoexist->btc_write_local_reg_1byte(btcoexist, 0x384, + u8tmp); + else if (btcoexist->chip_interface == BTC_INTF_SDIO) + btcoexist->btc_write_local_reg_1byte(btcoexist, 0x60, + u8tmp); + } +} + void ex_btc8821a2ant_init_coex_dm(struct btc_coexist *btcoexist) { struct rtl_priv *rtlpriv = btcoexist->adapter; -- 2.12.2