Dnia środa, 10 maja 2017 11:31:17 CEST Stanislaw Gruszka pisze: > On Sun, May 07, 2017 at 02:19:25PM +0200, Marek Floriańczyk wrote: > > > If RT5370 works for you I would stick with it. RTxxx chips with rt2800 > driver are capable to support up to 190 stations with HW encryption and > 11n aggregation (something that you are not interested). Theoretically > more stations can be added and those should fallback to software > encryption and frame aggregation will not be done, but I'm not sure if > anyone test that. > > I'm also not sure if many people test 11b, perhaps 11g would be better > choice. BTW, what kernel version are you using (I'm curious if 11b > still works on latest kernels) ? > > Stanislaw
Hi, Thanks for answer. I'm using Linux cubieboard2 4.9.12-sunxi This is Armbian based on Debian Jessie I'm using "b" mode on hostapd because our modules: http://www.electrodragon.com/product/esp-12f-esp8266-wifi-board/ have +20dBm when in "b" mode - that's what docs say. I still have problems when 80 devices are connected, after a few minutes some of them (10-20) deauthenticate with AP. When reporting from hostapd_cli, sta changes from: flags=[AUTH][ASSOC][AUTHORIZED][SHORT_PREAMBLE][WMM] aid=69 capability=0x31 listen_interval=100 supported_rates=8b 96 82 84 0c 18 30 60 6c 12 24 48 timeout_next=NULLFUNC POLL dot11RSNAStatsSTAAddress=5c:cf:7f:ff:eb:ee dot11RSNAStatsVersion=1 dot11RSNAStatsSelectedPairwiseCipher=00-50-f2-2 dot11RSNAStatsTKIPLocalMICFailures=0 dot11RSNAStatsTKIPRemoteMICFailures=0 hostapdWPAPTKState=11 hostapdWPAPTKGroupState=0 rx_packets=18 tx_packets=17 rx_bytes=3295 tx_bytes=3490 inactive_msec=134370 connected_time=832 To: flags=[AUTH] aid=0 capability=0x0 listen_interval=0 supported_rates= timeout_next=NULLFUNC POLL rx_packets=2 tx_packets=2 rx_bytes=48 tx_bytes=143 inactive_msec=1980 When I have only 20some devices it works always, but with more devices something goes wrong.... I'm running hostapd in debug mode now, and I have found station: 2c:3a:e8:00:33:e0 That deauthenticate with AP, but I don't know why, reason_code=3 "station is leaving (or has left) IBSS or ESS" Any help would be appreciated ;) Best Regards Marek
1494425876.349802: nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 1494425876.349952: nl80211: RX frame da=7c:dd:90:84:79:cc sa=2c:3a:e8:00:33:e0 bssid=7c:dd:90:84:79:cc freq=2437 ssi_signal=-43 fc=0xc0 seq_ctrl=0x450 stype=12 (WLAN_FC_STYPE_DEAUTH) len=26 1494425876.350132: wlan2: Event RX_MGMT (19) received 1494425876.350254: wlan2: mgmt::deauth 1494425876.350382: wlan2: deauthentication: STA=2c:3a:e8:00:33:e0 reason_code=3 1494425876.350518: 1494425876.350526: wlan2: STA 2c:3a:e8:00:33:e0 IEEE 802.11: deauthenticated 1494425876.350683: 1494425876.350691: wlan2: STA 2c:3a:e8:00:33:e0 MLME: MLME-DEAUTHENTICATE.indication(2c:3a:e8:00:33:e0, 3) 1494425876.350845: 1494425876.350853: wlan2: STA 2c:3a:e8:00:33:e0 MLME: MLME-DELETEKEYS.request(2c:3a:e8:00:33:e0) 1494425876.351468: nl80211: sta_remove -> DEL_STATION wlan2 2c:3a:e8:00:33:e0 --> 0 (Success) 1494425876.351681: ap_free_sta: cancel ap_handle_timer for 2c:3a:e8:00:33:e0 1494425876.351978: nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan2 1494425876.352135: nl80211: Delete station 2c:3a:e8:00:33:e0 1494425876.352441: nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 1494425876.352599: nl80211: RX frame da=7c:dd:90:84:79:cc sa=2c:3a:e8:00:33:e0 bssid=7c:dd:90:84:79:cc freq=2437 ssi_signal=-41 fc=0xb0 seq_ctrl=0x460 stype=11 (WLAN_FC_STYPE_AUTH) len=30 1494425876.352783: wlan2: Event RX_MGMT (19) received 1494425876.352900: mgmt::auth 1494425876.353251: authentication: STA=2c:3a:e8:00:33:e0 auth_alg=0 auth_transaction=1 status_code=0 wep=0 seq_ctrl=0x460 1494425876.353425: New STA 1494425876.354104: ap_sta_add: register ap_handle_timer timeout for 2c:3a:e8:00:33:e0 (300 seconds - ap_max_inactivity) 1494425876.354721: nl80211: sta_remove -> DEL_STATION wlan2 2c:3a:e8:00:33:e0 --> -2 (No such file or directory) 1494425876.354943: nl80211: Add STA 2c:3a:e8:00:33:e0 1494425876.355185: * supported rates - hexdump(len=0): [NULL] 1494425876.355346: * capability=0x0 1494425876.355458: * aid=1 (UNASSOC_STA workaround) 1494425876.355675: * listen_interval=0 1494425876.355810: * flags set=0x0 mask=0xa0 1494425876.356195: 1494425876.356205: wlan2: STA 2c:3a:e8:00:33:e0 IEEE 802.11: authentication OK (open system) 1494425876.356594: 1494425876.356604: wlan2: STA 2c:3a:e8:00:33:e0 MLME: MLME-AUTHENTICATE.indication(2c:3a:e8:00:33:e0, OPEN_SYSTEM) 1494425876.356958: 1494425876.356966: wlan2: STA 2c:3a:e8:00:33:e0 MLME: MLME-DELETEKEYS.request(2c:3a:e8:00:33:e0) 1494425876.357128: authentication reply: STA=2c:3a:e8:00:33:e0 auth_alg=0 auth_transaction=2 resp=0 (IE len=0) 1494425876.357266: nl80211: send_mlme - da= 2c:3a:e8:00:33:e0 noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xb0 (WLAN_FC_STYPE_AUTH) nlmode=3 1494425876.357400: nl80211: send_mlme -> send_frame 1494425876.357502: nl80211: send_frame - Use bss->freq=2437 1494425876.357600: nl80211: send_frame -> send_frame_cmd 1494425876.357956: nl80211: Drop oldest pending send action cookie 0x9b89 1494425876.358476: nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan2 1494425876.358651: nl80211: New station 2c:3a:e8:00:33:e0 1494425876.358936: nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan2 1494425876.359086: nl80211: RX frame da=7c:dd:90:84:79:cc sa=2c:3a:e8:00:56:6e bssid=7c:dd:90:84:79:cc freq=2437 ssi_signal=-51 fc=0xc0 seq_ctrl=0x350 stype=12 (WLAN_FC_STYPE_DEAUTH) len=26
