On 26-05-17 19:11, Arend van Spriel wrote:
> On 26-05-17 16:53, Kalle Valo wrote:
>> Arend van Spriel <arend.vanspr...@broadcom.com> writes:
>>
>>>>>> Fixes: 6e84ab604bde ("properly align buffers ... with 64 bit DMA")
>>>>>> Suggested-by: Arend van Spriel <arend.vanspr...@broadcom.com>
>>>>>> Signed-off-by: Hans de Goede <hdego...@redhat.com>
>>>>>
>>>>> I'll queue this to 4.12.
>>>>
>>>> Thank you, given that Arend is set as the Author you can add my:
>>>>
>>>> Tested-by: Hans de Goede <hdego...@redhat.com>
>>>>
>>>> And maybe drop the Suggested-by: Arend van Spriel ?
>>
>> Sure, I can add that.
>>
>>> Seems to me you need my Signed-off-by: as I do not see that in this patch.
>>
>> Yes, that is needed if you are the author. If you reply to this message
>> I can add that.
>
> Ok. Here it is. Please feel free to add Signed-off-by tag for me
> authoring this change. The Signed-off-by tag for Hans can stay as well
> as this patch went through his hands (and he came up with the commit
> message ;-) ).
Hi Kalle,
Here is the commit message I came up with which may explain the issue
better:
"""
brcmfmac: fix alignment configuration on host using 64-bit DMA
For SDIO the alignment requirement for transfers from device to host
is configured in firmware. This configuration is limited to minimum
of 4-byte alignment. However, this is not correct for platforms using
64-bit DMA when the minimum alignment should be 8 bytes. This issue
appeared when the ALIGNMENT definition was set according the DMA
configuration. The configuration in firmware was not using that macro
defintion, but a hardcoded value of 4. Hence the driver reported
alignment failures for data coming from the device and causing
transfers to fail.
Fixes: 6e84ab604bde ("brcmfmac: properly align buffers on certain platforms
Reported-by: Hans de Goede <hdego...@redhat.com>
Tested-by: Hans de Goede <hdego...@redhat.com>
Reviewed-by: Hante Meuleman <hante.meule...@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesbe...@broadcom.com>
Reviewed-by: Franky Lin <franky....@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspr...@broadcom.com>
"""
I leave it at your discretion how to deal with this. If needed I can
submit the complete patch.
Regards,
Arend
