On 7/26/2017 8:19 AM, Stefan Wahren wrote:
Hi,
Stefan Wahren <stefan.wah...@i2se.com> hat am 17. Juli 2017 um 22:31
geschrieben:
Hi,
Franky Lin <franky....@broadcom.com> hat am 17. Juli 2017 um 21:50 geschrieben:
On Mon, Jul 17, 2017 at 6:10 AM, Stefan Wahren <stefan.wah...@i2se.com> wrote:
Hi,
Stefan Wahren <stefan.wah...@i2se.com> hat am 28. Juni 2017 um 21:33
geschrieben:
Hi,
i'm currently working on Raspberry Pi Zero W for Mainline. Here is my first
patch series [1].
Unfortunately i didn't get brcmfmac (connected via SDIO) probed with this patch
series against 4.12.0-rc5-next-20170616+
[ 8.389167] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 8.735111] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27
2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[ 8.786016] brcmfmac: brcmf_sdio_hostmail: Unknown mailbox data content:
0x40012
[ 11.288798] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 11.292822] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
[ 13.848777] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 13.852974] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
[ 16.408762] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 16.413004] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
[ 18.968769] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 18.972965] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
[ 21.528743] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 21.532924] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
[ 24.088745] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[ 24.092948] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
[ 26.648764] brcmfmac: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg
failed w/status -110
[ 26.648789] brcmfmac: brcmf_cfg80211_attach: Failed to get D11 version (-110)
[ 26.648831] brcmfmac: brcmf_bus_started: failed: -12
[ 26.648842] brcmfmac: brcmf_sdio_firmware_callback: dongle is not responding
...
Can you please try to comment out the following lines in
brcmf_feat_attach? That's the only suspicious line that interact with
firmware in the patch.
+ brcmf_feat_iovar_data_set(ifp, BRCMF_FEAT_GSCAN, "pfn_gscan_cfg",
+ &gscan_cfg, sizeof(gscan_cfg));
after commenting out this line, the issue doesn't appear.
what are the plans to fix this regression?
I am a bit in doubt about this one. We can avoid the firmware config
above for bcm4343x devices as a short term fix. However, I would like to
root cause the issue. Received a Pi Zero over here so gearing it up.
Regards,
Arend
