Hello! Sorry for late answer.
> russianneuromancer has reported seeing a similar problem with 4.13. > russianneuromancer, can you check if the device you are seeing this with also has a brcm43430 sdio wifi and if so if switching to: > http://jwrdegoede.danny.cz/brcm-firmware/brcmfmac43430-sdio.bin.7.45.77.0.ucode1043.2054 > Fixes this ? Judging by this error message > [ 7.744262] brcmfmac mmc0:0001:1: Direct firmware load for > brcm/brcmfmac43241b4-sdio.txt failed with error -2 Lenovo Miix2 8 have brcm43241b4 sdio wifi. With brcmfmac43241b4-sdio.txt from NVRAM, as suggested here https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 WiFi connection works for me with upstream Linux 4.12.4, but doesn't work with Linux 4.13rc1 and Linux 4.13rc3. Few connection attempts with Linux 4.13rc3 looks like this: > [ 7.779370] usbcore: registered new interface driver brcmfmac > [ 7.948487] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Jul > 17 2013 07:36:07 version 6.10.197.71 (r412987) FWID 01-882d2634 > [ 32.282374] brcmfmac: brcmf_p2p_create_p2pdev: set p2p_disc error > [ 32.282393] brcmfmac: brcmf_cfg80211_add_iface: add iface p2p-dev-wlan0 > type 10 failed: err=-16 > [ 43.560596] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 44.494422] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 45.492956] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 46.491317] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 54.922652] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 55.849565] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 56.849437] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 57.853150] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 66.542999] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 67.483115] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 > [ 68.483434] brcmfmac: brcmf_proto_bcdc_hdrpull: wlan0: non-BCDC packet > received, flags 0x0 23.07.2017, 02:44, "Hans de Goede" <hdego...@redhat.com>: > Hi, > > When upgrading my devel environment to 4.13-rc1+ I noticed that > the brcm43430 sdio wifi on a Chuwi Hi8 plus stopped working: > > jul 22 14:13:23 localhost.localdomain kernel: brcmfmac: brcmf_sdio_probe: > Loading firmware brcm/brcmfmac43430-sdio.bin for chip 0000a9a6 rev 00000001 > jul 22 14:13:23 localhost.localdomain kernel: usbcore: registered new > interface driver brcmfmac > jul 22 14:13:23 localhost.localdomain kernel: brcmfmac: > brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version > 7.45.41.26 (r640327) FWID 01-4527cfab > jul 22 14:13:23 localhost.localdomain kernel: brcmfmac: brcmf_sdio_hostmail: > Unknown mailbox data content: 0x40012 > jul 22 14:13:26 localhost.localdomain kernel: brcmfmac: brcmf_sdio_bus_rxctl: > resumed on timeout > jul 22 14:13:28 localhost.localdomain kernel: brcmfmac: brcmf_sdio_bus_rxctl: > resumed on timeout > jul 22 14:13:31 localhost.localdomain kernel: brcmfmac: brcmf_sdio_bus_rxctl: > resumed on timeout > <repeats> > > The real culprit here seems to be: > > jul 22 14:13:23 localhost.localdomain kernel: brcmfmac: brcmf_sdio_hostmail: > Unknown mailbox data content: 0x40012 > > I've tried reverting allmost all changes under > drivers/net/wireless/broadcom/brcm80211 > as well as those under drivers/mmc, but that did not help. > > Googling for the "Unknown mailbox data content" error found some Raspberry Pi > 3 > related comments where users report success with a different firmware version > from: > https://android.googlesource.com/platform/hardware/broadcom/wlan/+/master/bcmdhd/firmware/bcm4343/ > > So I tried that as well as a version extracted from the Android install > on the tablet and both work fine, only the "version 7.45.41.26" which > happens to be the one in linux-firmware causes this problem, I've put > all (Linux build, not NDIS) versions I could find here: > > http://jwrdegoede.danny.cz/brcm-firmware/ > > I've the feeling that the 7.45.41.26 version is a bit buggy / suspect to > certain timing problems and 4.13 just happens to trigger those timing > conditions... > > russianneuromancer has reported seeing a similar problem with 4.13. > > russianneuromancer, can you check if the device you are seeing this with > also has a brcm43430 sdio wifi and if so if switching to: > > http://jwrdegoede.danny.cz/brcm-firmware/brcmfmac43430-sdio.bin.7.45.77.0.ucode1043.2054 > > Fixes this ? > > Regards, > > Hans
