Hi Alagu,
On Sat, Sep 30, 2017 at 11:07:45PM +0530, silexcom...@gmail.com wrote:
> From: Alagu Sankar <alagusan...@silex-india.com>
>
> convert different read write functions in sdio hif to bring it under a
> single read-write path. This helps in having a common dma bounce buffer
> implementation. Also helps in address modification that is required
> specific to change in certain mbox addresses of sdio_write.
>
> Signed-off-by: Alagu Sankar <alagusan...@silex-india.com>
> ---
> drivers/net/wireless/ath/ath10k/sdio.c | 131
> ++++++++++++++++-----------------
> 1 file changed, 64 insertions(+), 67 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/sdio.c
> b/drivers/net/wireless/ath/ath10k/sdio.c
> index 77d4fa4..bb6fa67 100644
> --- a/drivers/net/wireless/ath/ath10k/sdio.c
> +++ b/drivers/net/wireless/ath/ath10k/sdio.c
> @@ -36,6 +36,11 @@
>
> #define ATH10K_SDIO_DMA_BUF_SIZE (32 * 1024)
>
> +static int ath10k_sdio_read(struct ath10k *ar, u32 addr, void *buf,
> + u32 len, bool incr);
> +static int ath10k_sdio_write(struct ath10k *ar, u32 addr, const void *buf,
> + u32 len, bool incr);
> +
As mentioned by Kalle, u32 needs to be size_t.
> /* inlined helper functions */
>
> /* Macro to check if DMA buffer is WORD-aligned and DMA-able.
> @@ -152,6 +157,7 @@ static int ath10k_sdio_config(struct ath10k *ar)
> struct sdio_func *func = ar_sdio->func;
> unsigned char byte, asyncintdelay = 2;
> int ret;
> + u32 addr;
>
> ath10k_dbg(ar, ATH10K_DBG_BOOT, "sdio configuration\n");
>
> @@ -180,9 +186,8 @@ static int ath10k_sdio_config(struct ath10k *ar)
> CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C |
> CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D);
>
> - ret = ath10k_sdio_func0_cmd52_wr_byte(func->card,
> -
> CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR,
> - byte);
> + addr = CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR,
> + ret = ath10k_sdio_func0_cmd52_wr_byte(func->card, addr, byte);
Not sure this part is needed.
> if (ret) {
> ath10k_warn(ar, "failed to enable driver strength: %d\n", ret);
> goto out;
> @@ -233,13 +238,16 @@ static int ath10k_sdio_config(struct ath10k *ar)
>
> static int ath10k_sdio_write32(struct ath10k *ar, u32 addr, u32 val)
> {
> - struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
> - struct sdio_func *func = ar_sdio->func;
> + __le32 *buf;
> int ret;
>
> - sdio_claim_host(func);
> + buf = kzalloc(sizeof(*buf), GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
>
> - sdio_writel(func, val, addr, &ret);
> + *buf = cpu_to_le32(val);
> +
> + ret = ath10k_sdio_write(ar, addr, &val, sizeof(val), true);
Shouldn't we use buf instead of val? buf seems pretty useless otherwise.
Regards,
Gary
